Get Latest May-2022 Conduct effective penetration tests using TestKingFree 301a [Q40-Q54]

Rate this post

Get Latest [May-2022] Conduct effective penetration tests using TestKingFree 301a

Penetration testers simulate 301a exam PDF

NO.40 An LTM Specialist needs to create a virtual server to pass TCP traffic to three pool members.
Which two virtual server types should be used to meet the requirements? (Choose two)

Performance (Layer A)

Standard

Forwarding (IP)

Stateless

Forwarding (Layer 2)

NO.41 An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?

Performance 14 virtual server with an HTTP profile

Standard virtual server with an HTTP profile

Performance 14 virtual server with a FastHTTP profile

Standard virtual server with a TCP profile

NO.42 TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich, Which health monitor setting should be used to verify that the firewalls are able to forward traffic?

Adaptive

Reverse

Transparent

Up internal

Sandwich architect firewalls are generally deployed transparently. You can enable Transparent to point to the next-hop address of the firewall and associate it with the firewall pool member for detection.

NO.43 An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server’s traffic access the internet through the LTM device?

NAT

SNAT Pool

SNAT List

SNAT Automap

NO.44 An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?

# tmsh create pool http_pool members {10.10.10.101:80}

# tmsh create pool http_pool members add {10.10.10.101:80}

# tmsh create it pool http_pool members {10.10.10.101:80}

# tmsh create itm pool http_pool member {10.10.10.101:80}

The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}

NO.45 The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server.
Which virtual server type will improve the performance of the web application servers?

Performance (HTTP)

Performance (Layer 4)

Stateless

Forwarding (IP)

NO.46 A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?

Forwarding (Layer 2)

Standard

Stateless

DHCP relay

Forwarding (IP)

NO.47 An LTM Specialist must reconfigure a BIG-IP LTM system that load balances traffic to web application servers. The application developer inform the LTM Specialist that TLS must be used to communicate with the application servers.
Which additional profile is required as part of virtual server configuration?

SPDV profile

Server SSL

Client SSL

Rewrite profile

NO.48 An LTM Specialist needs to configure a virtual server with the requirements displayed below.
Application is currently an internal HTTP application
Encrypted external user access
Links are hard for siteA example.com and need to rewritten to siteB.Example.com Which profiles must the LTM Specialist use to provide the proper functionality?

Clientssll, Stream

Serverless, Stream

Clientssl, fastL4, Stream

Serverless, fastL4, Stream

For http application and external encryption, clientssl is required, and if the message content needs to be modified, the steam profile is required. FastL4 profile cannot coexist with clientssl and stream.

NO.49 An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.
Which metric should be part of the analytics profile to provide that information?

Page Load Time

User Sessions

Max TPS and Throughout

Response Codes

NO.50 An LTM Specialist is the administrator of an HA pair that contains two BIG IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.
Which configuration should the LTM Specialist use to meet the requirement?

Move the BIG-IP Managers from TG1 to TG2

Create a new partition and set the default traffic group to TG2

Modify the default traffic group of the Common partition to TG2

Restrict the Traffic Group Access of BIG-I Managers to TG2

NO.51 An LTM Specialist needs to upgrade all guests on a Viprion eight CMP guests.
What is the maximum number of guests that the LTM Specialist should upgrade at once?

Eight

One

TWO

Four
Explanation
Each guest is independent, just like hardware upgrades. Can only upgrade one by one, there is no way to upgrade at the same time.

NO.52 An LTM Specialist is configuring a new virtual server on an LTM device and assigning a SNAT pool that is already is use another virtual server. Both virtual servers use the same pool members to load balance traffic. A maximum of 35,000 users needs to be able to access each virtual server ta any time. The network architecture does NOT allow the backend servers to use the LTM device as a default gateway.
What is the minimum number of SNAT addresses required in the SNAT pool to meet the needs of the virtual servers?

Both vs share the same snat pool, and both use the same pool member. Then the concurrent number of snatpool will be added. For each VS, there is a maximum of 35,000 users, and those two VSs have a maximum of 70,000 users. The stem did not mention how many connections each user would have concurrently. Calculated with a minimum of 1 connection, then 70,000 connections would be concurrent. One IP can support 65,535 connection. Therefore, at least 2 or more snaptips are required

NO.53 An LTM Specialist must create a new virtual server for HTTP access. The LTM Specialist creates a forwarding virtual server to reach the resource.
What is a potential result of this action?

IP conflict result

HTTP traffic is NOT allowed

Other service ports could be allowed

Packet filter allowances are also required

NO.54 An HTTP monitor is created and assigned to a pool with the following non-default configuration:
Interval: 7 seconds
Timeout: 22 seconds
Reverse: Yes
Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive String: Up The HTTP server sends the following response:

What is the resulting pool status?