Latest [May 30, 2022] 100% Passing Guarantee - Brilliant DES-4122 Exam Questions PDF [Q32-Q46] : Testking Free Dumps : http://blog.testkingfree.com

NEW QUESTION 32
What is a characteristic of out-of-band management?

Dedicated device

Agent based

Less secure

Dependent upon OS

NEW QUESTION 33
What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

Firmware: Upgrade to latest available version
Configuration Apply always

Firmware Allow version upgrade only
Configuration: Disabled

Firmware: Match firmware of replaced part
Configuration Apply always

Firmware Disabled
Configuration Apply only if firmware match

NEW QUESTION 34
What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?

Flexibility to choose interconnects

Fixed networking card

Consume a PCIe slot

Provide a hot-swap component

NEW QUESTION 35
What is a key distinction between 1DRAC8 and 1DRAC9?

iDRAC9 offers HTML5 based GUI

iDRAC9 default credentials are root/calvin orderable only

iDRAC8 offers HTML5 based GUI

iDRAC8 default credentials are customer orderable

NEW QUESTION 36
A technician working with a Dell EMC PowerEdge 1 take corrective action?

Check the System Event Log
Check PSU LED
Reseat the PSU

Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC

Check the LCC Log
Check PSU LED
Reseat the CPU

Check the LCC Log
Check PSU LED
Reseat the PSU

NEW QUESTION 37
You are Investigating a disk error on a Dell EMC PowerEdge server and discover a Hot Spare has not been assigned to the Virtual Disk Group. Use the simulator to assign the Global Hot Spare. When you have finished using the simulator, dick Next.

NEW QUESTION 38
How can a technician know whether IDRAC9 System Lockdown mode is enabled?

Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots

Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots

NEW QUESTION 39
A technician is sent on-site to troubleshoot a server that produced an error message during the most recent POST, but then completed the POST and booted to the operating system. The user cannot remember the specific error and no entry was made in the error log relating to this error.
How can the technician find out what the error message was?

Access the Lifecycle Controller and view the last boot cycle video capture entry

Reload the BIOS firmware

Export the Server profile and analyze for any POST errors

Access the iDRAC and view the last boot cycle video capture entry

NEW QUESTION 40
What is the minimum number of components, beside the system board, required to POST?

PSUs, CPUs, and DIMMs as configured in BIOS

1 PSU, 1 DIMM, and 1 CPU only

1 PSU and 1 CPU only

1 PSU, 1 CPU, 1 DIMM, and PERC SAS controller

NEW QUESTION 41
Which card connects to the PCI bus, is physically smaller than a on the system board of a Dell EMC PowerEdge 14G server?

NDC

OCP

PCIe

FPGA

NEW QUESTION 42
What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?

Ensures that the installed operating system is authentic

Ensures that the server has a valid Service Tag number

Ensures that no unauthorized BIOS or firmware codes are run

Ensures that the server boots only when connected to a verified network

NEW QUESTION 43
What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?

All GPU cards must be installed at the same time

All GPU cards must be of the same type but can be a different model

All GPU cards must be of the same type and model

All GPU cards must be installed on the same riser card.

NEW QUESTION 44
A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad
1Gb NIC and redundant power supplies The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC What should the technician do to verify iDRAC connectivity on each server?

iDRAC Datacenter license is installed.

Ethernet port LOM1 is cabled and the link light is green.

iDRAC dedicated NIC port is cabled and the link light is green

iDRAC Enterprise license is installed

NEW QUESTION 45
A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber What should they do to take corrective action upon checking the System Event log?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 46
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?

Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices

Dispatches technical support from Dell for all Dell servers, storage, and networking devices

Proactive, predictive, and automated support technology to enable faster resolution and reporting

Includes onsite monitoring and automated collection of system state information