Assume NACE NACE-CIP1-001 Dumps PDF Are going to be The Best Score [Q59-Q79]

Assume NACE NACE-CIP1-001 Dumps PDF Are going to be The Best Score

CIP Level 1 NACE-CIP1-001 Exam and Certification Test Engine

The purpose of the NACE CIP1-001 certification is explained here

The objective of the NACE CIP1-001 certification is to test and certify the candidate’s knowledge, skill, and expertise in the field of coatings. The candidates need to acquire a certificate that certifies them as qualified coatings inspectors. The candidate can earn this certification by passing the NACE CIP1-001 exam. Change during curing is a process that is used by manufacturers. In this process, chemicals and additives are added to the concrete mix to change its characteristics. The concrete mix is then cured in order to make it hard and durable. Conforming item is one of the important techniques that are used in the construction industry. It is a process in which a material is used to match another material. The conformity of the two materials depends on the shape, size, and other characteristics. The surface roughness of the material determines whether it is an easy or a difficult surface to paint. The surface should be free of any scratches or stains. The smoothness of the surface also plays an important role. It makes the surface to be more decorative. The paint manufacturer uses a variety of paints to give different colors to the object. The color of the paint depends on the type of surface. Offer free is one of the ways in which coatings are applied to the surfaces. In this technique, a coating is applied over the entire surface. It is a way of giving protection to the object.

Blast standards are used by companies to measure the safety of workers. The NACE CIP1-001 exam dumps help the candidates to get a good score in the exam. They provide you with all the necessary information. We guarantee that the materials we are providing you will help you to crack the exam easily. We give you the NACE CIP1-001 practice test. We make sure that our materials are 100% reliable. We have also given you a money back guarantee. If you are not satisfied with our materials then you can ask for a refund. We are also providing you with free updates. You should use these materials for your preparation. The NACE CIP1-001 exam is very important for all candidates.

QUESTION 59
It is good practice for the NACE Inspector to have instrument calibration certificates available:

 At all times

 In the office only

 In the field only

 Only if the specification requires it

QUESTION 60
ISO SA 2 is defined as:

 Near White Metal Blasting

 Thorough Blast Cleaning

 Very Thorough Blast Cleaning

 Light Blast Cleaning

QUESTION 61
ASTM Standards are applicable:

 In the USA

 In North America

 In Asia

 When specified

QUESTION 62
Corrosion generally occurs at which of the following sites:

 Cathode

 Metallic pathway

 Electrolyte

 Anode

QUESTION 63
Check abrasive blast pressure close to the

 compressor

 blast pot

 blast nozzle

 substrate

QUESTION 64
What is the minimum recommended distance away from an edge that an inspector should take a measurement with a dial-type magnetic pull-off Dry Film Thickness (DFT) gauge?

 1 cm (.39 inch)

 2.5 cm (1 inch)

 6.35 cm (2.5 inch)

 2.5 millimeters (.10 inch)

QUESTION 65
Prior to using Inspection Tools the inspector must:

 Ensure the instrument is within calibration parameters

 Be trained on how to use the instrument

 Read the manufactures’ instructions

 a), b) & c)

QUESTION 66
Osmotic blistering is most likely to occur as a result of

 inadequate anchor pattern/surface profile.

 overcoating a surface contaminated with chemical salts.

 airless spray application

 applying tine coating too thin.

QUESTION 67
In a non-convertible coating the role of the primary solvent is to:

 To make the coating flow out better

 To dissolve the resin

 To promote faster cure

 To control the evaporation rate

QUESTION 68
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the default restriction level is:

 Level 1

 Level 2

 Level 3

 Level 4

QUESTION 69
Stripe coats are generally applied to:

 Edges and corners

 Welds

 Complex geometric shapes

 a), b), and c)

QUESTION 70
When using the ISO comparator in accordance with ISO 8503, if the surface profile does not directly compare to one of the four segments the inspector should:

 Use another method as the comparator method is too subjective

 Record the segment with the more aggressive profile

 Record the segment with the less aggressive profile

 Record your result by identifying two segments

QUESTION 71
You are the NACE Inspector on a 5000 sq. ft. job where SSPC PA 2 has been specified.
Assuming all areas are in compliance, how many gauge readings and spot measurements are required?

 105 Gauge Readings resulting in 35 Spot Measurements

 75 Gauge Readings resulting in 25 Spot Measurements

 225 Gauge Readings resulting in 75 Spot Measurements

 45 Gauge readings resulting in 15 Spot Measurements

QUESTION 72
Due to a previous premature coating failure the owner has required the original coating applicator to return to remove and replace 10,000 square feet of a failed three coat system at the applicator’s cost. Due to the financial implications of another failure, the owner has offered you the job as the NACE CIP Level 1 Coating Inspector and explained that he expects you to be his “insurance policy” for this job. You have never been involved in a warranty job before and are unfamiliar with the coating system.
Your preferred FIRST course of action is to:

 Review the Product Data Sheets and meet with the Coating Applicator ‘prior to the pre-job meeting

 Review the Product Data Sheets, and conduct a walk thru of the job site prior to the pre-job Conference

 Purchase Professional Liability Insurance prior to job commencement

 Meet with the owner and explain your limitations and concerns prior accepting the assignment

QUESTION 73
What is the minimum spot measurement value allowed by SSPC-PA 2 in each 10 m2 (100 ft2) area?

 70% of the specified maximum thickness

 80% of the specified minimum thickness

 90% of the specified maximum thickness

 100% of the specified maximum thickness

QUESTION 74
The main responsibilities of the inspector are to

 demonstrate to the contractor how to apply the coating.

 observe and direct the work of the contractors.

 direct and perform the work stated in the specification.

 observe and report the quality of the work performed.

QUESTION 75
An inspectors personal log book should contain:

 Subjective comments re ding the application team

 Objective comments regarding the application work

 No comments regarding the application team

 The inspector’s personal opinions of the application team

QUESTION 76
In the event of a conflict between the project specification and the coating manufactures’ product data sheet, the Inspector’s first course of action should be too:

 Call the coating manufacturer for clarification

 Use the product data sheet as a guide

 Use the job specification as a guide

 Call the person who wrote the specification for clarification

QUESTION 77
The Inspector’s Log Book is generally:

 Retained by the inspector upon project completion

 Submitted to the client upon project completion

 Shared with all parties upon project completion

 Shredded by the inspector upon project completion

QUESTION 78
The NACE Inspector should perform tests for soluble salts:

 Prior to surface preparation

 After surface preparation

 Prior to coating application

 When specified

QUESTION 79
Silicone coatings are typically:

 Used strictly in immersion service

 Applied in very thick films

 Used as a sacrificial primer

 Applied in very’ thin films

 Loading …

What is the Passing Score, Duration & Question for the NACE CIP1-001 Exam?

• Passing score: at least 50%
• Duration Exam: 2 hours
• Exam Format: Multiple choice
• Languages: English
• No. of questions: 100

Use NACE-CIP1-001 Exam Dumps (2022 PDF Dumps) To Have Reliable NACE-CIP1-001 Test Engine: https://www.testkingfree.com/NACE/NACE-CIP1-001-practice-exam-dumps.html