Get Perfect Results with Premium NS0-183 Dumps Updated 61 Questions [Q22-Q40]

5/5 - (1 vote)

Get Perfect Results with Premium NS0-183 Dumps Updated 61 Questions

Free NS0-183 Exam Study Guide for the NEW Dumps Test Engine

NetApp NS0-183 Exam Topics:

Section	Objectives
ONTAP Configuration	– Describe how to use NetApp configurations – Demonstrate knowledge of how a node should be added or replaced
ONTAP Networking	– Describe the cluster network, e.g., multi-node, single node clusters – Demonstrate knowledge of the purpose of the management network – Identify the networking components in a cluster environment
Basic Installation Topics and Tools	– Describe installation preparation steps – Describe basic equipment installation steps
ONTAP Switches	– Identify the functions of supported switches – Demonstrate knowledge of how to configure/verify configuration requirements
Customer Handoff	– Describe how to complete the service report – Demonstrate knowledge of handoff procedures to the customer – Demonstrate knowledge of how to communicate completion and possible problem status – Identify contacts for additional help after handoff
ONTAP Concepts	– Identify general cluster terms used during installation – Identify ONTAP licensing for 9.7

NetApp NS0-183 Exam Certification Details:

Number of Questions	60
Exam Registration	PEARSON VUE
Exam Price	$150 USD
Passing Score	67%
Exam Name	Storage Installation Engineer ONTAP

NO.22 Click the Exhibit button.

You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)

Move the SAS cables to a new stack.

Enable in-band ACP.

Remove the Ethernet cables.

Disable out-of-band ACP.

Explanation/Reference:

NO.23 A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

the ability to move the volumes from the old nodes to the new nodes

the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s

the ability to create a 4-node MetroCluster across the four nodes

the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

NO.24 An iSCSI LIF fails to migrate during a storage failover test.
In this scenario, why did the LIF not migrate?

A failover port was not defined.

LIFs that serve block protocols do not failover.

The failover policy was not configured.

LIF failover was not enabled.

NO.25 Which three components are required when setting up a new ONTAP cluster? (Choose three.)

password

cluster management IP

node management IP

Advanced Drive Partitioning

intercluster IP

NO.26 You install a new 2-node FAS8200 switchless cluster. You want to reach all necessary management LIFs and SPs for this cluster.
How many management IP addresses do you need in this scenario?

NO.27 Click the Exhibit button.

After you install a FAS2720 with ONTAP 9.5, you disconnect the management port of node A to demonstrate cluster management LIF failover to the custom. When you reconnect the management port and try to revert the interface, you receive the following message.
Info: LIF “cluster_mgmt” has been hosted on port “NetApp-Cluster-01:e0M”, whosehealth status is degraded.
You issue the network port showcommand and see the output shown in the exhibit. When you try to access the cluster interface, you cannot ping or connect to the cluster through the network.
Which two troubleshooting steps must you perform to solve the issue? (Choose two.)

Set the Ignore Health Status parameter to true.

Use the network port modify -up-admin command to administratively down and up the port.

Reconnect the management cable to bring the port online.

Set the Ignore Health Status parameter to false.

NO.28 You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.

Referring to the exhibit, which steps are required to get an HA cabled system?

1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.

1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3. 2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.

1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4. 2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4. 3. Cable the out-of-band ACP.

1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3. 2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.

NO.29 You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

Active IQ scheduled reports

NetAppDocs output report

ONTAP System Manager

Active IQ Config Advisor worksheet

https://library.netapp.com/ecmdocs/ECMP1307349/html/GUID-08047CFA-4D59-4E35-B232-1B5FDBBBE0F0.html

NO.30 You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer’s requests are satisfied?

Perform a takeover of Node 2 to ensure that it does not run.

Assign all data LIFs to Node 1.

Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.

Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.

NO.31 When you install a new ONTAP 9.7 4-node cluster, which network type is required?

data network

peering network

cluster interconnect

intercluster network

Explanation/Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-nmg/Network%20and%20LIF%
20management.pdf

NO.32 You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?

routing

BGP

broadcast domains

IPspaces

NO.33 Click the Exhibit button.

You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?

Swap node1:e8a and node2:e4a.

Swap node1:e4a and node1:e8a.

Swap node2:e4a and node2:e8a.

Swap node1:e4a and node2:e4b.

NO.34 You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?

System Diagnostics

Cloud Insights

Active IQ Config Advisor

Active IQ Unified Manager

NO.35 You are creating a new aggregate with one RAID-TEC RAID group.
How many parity drives are used in this scenario?

NO.36 You are installing a new AFF A400 cluster for a customer. The customer indicates that they want to take advantage of AutoSupport On Demand.
In this scenario, which AutoSupport transport protocol must you use?

HTTP

SMTP

FTP

HTTPS

NO.37 One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.
Which two methods would you use to connect to the node failing to come back online? (Choose two.)

Use the Intelligent Platform Management Interface.

Use the Service Processor Interface.

Use Secure Shell.

Use Telnet.

NO.38 After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.

Referring to the exhibit, what caused the problem?

Port a0a of node cluster1-01 is down.

The LIF has to be configured with a failover group.

The ports of cluster1-02 are missing in the broadcast domain.

The broadcast-domain MTU needs to be either 1500 or 9000.

NO.39 Click the Exhibit button.

As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)

private network

cluster LIFs

client network

management LIFs

NO.40 You just installed two nodes into an existing ONTAP cluster.

When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?