2023 Valid 1Y0-241 Exam Updates - 2023 Study Guide [Q55-Q72]

5/5 - (1 vote)

2023 Valid 1Y0-241 Exam Updates – 2023 Study Guide

1Y0-241 Certification – The Ultimate Guide [Updated 2023]

NO.55 Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packetforwarding function based on the route table lookups?

MBF

USIP

Layer 2

Layer 3

NO.56 Scenario: A Citrix Administrator manages an environment that has three SSL websites, all serving the same content.
www.company.com
www.company.net
www.company.org
The administrator would like to consolidate the websites into a single, load-balanced SSL vServer.
What can the administrator bind to use a single SSL vServer?

A wildcard certificate to a single SSL vServer

A wildcard certificate to a content-switching vServer

The certificate of each website to a single SSL vServer

A multiple SAN certificate to a single SSL vServer

NO.57 Which Citrix ADC platform offers an out-of-the-box multi-tenant solution?

VPX

SDX

MPX

CPX

NO.58 Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?

DTLS

TCP

SSL

HTTP

NO.59 Scenario: A Citrix Administrator configured a rewrite action as follows:
> add rewrite action sync_date replace http.res.date.sys.time
What is the correct way to interpret this rewrite action?

It replaces the date header in the HTTP response with the Citrix ADC system time in a conventional date format.

It replaces the date header in the HTTP response with the Greenwich Mean Time (GMT) time stamp.

It replaces the Citrix ADC system time with the date header in a conventional date format.

It is invalid, as system time CANNOT be referenced in the system policy.

NO.60 Which two items must be true for a client to connect to an SSL offload vServer without any SSL errors? (Choose two.)

The server certificate is from a private certificate authority (CA).

The server certificate is bound to the load-balancing vServer.

The root certificate is installed on the Citrix ADC.

The root certificate is installed on the client s device.

NO.61 Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?

A command policy to the group

A nested group to the new group

Users to the group on the Citrix ADC

An authentication, authorization, and auditing (AAA) action to the group

NO.62 What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?

A private key

A certificate revocation list (CRL)

A certificate signing request (CSR)

A certificate key-pair

NO.63 Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?

Interface 1/1 is bound to VLAN 20, and native VLAN is 20.

Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.

Interface 1/1 is bound to VLAN 20, and native VLAN is 40.

Interface 1/1 is bound to VLAN 20, and native VLAN is 1.

https://www.citrix.com/blogs/2014/12/29/netscaler-vlans-demystified/
https://support.citrix.com/article/CTX115575

NO.64 When a Citrix ADC high availability (HA) pair failover occurs, by what method does the Citrix ADC communicate to the network switches and routers that IP-to-MAC address bindings have changed?

Reverse ARP (RARP) to update the network devices

MAC-based forwarding (MBF) to update the routers

Proxy ARP to update the network devices

Gratuitous ARPs (GARPs) to update the network devices

NO.65 Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)

route

process

bridge

drop

NO.66 Scenario: A Citrix Administrator needs to create local, limited-privilege user accounts for other administrators. The other administrators will require only:
Read-only access
The ability to enable and disable services and servers
Which built-in command policy permission level can the administrator use?

Operator

Network

Sysadmin

Read-only

NO.67 A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?

REPLACE

CORRUPT_HTTP_HEADER

REPLACE_HTTP_REQ

REPLACE_ALL

NO.68 A Citrix Administrator notices that the Citrix ADC is sending the IP addresses of all the active services in the DNS response.
The administrator can use the set gslb vServer<name> __________________ parameter to change this behavior.

EDR ENABLED

MIR DISABLED

MIR ENABLED

EDR DISABLED

NO.69 Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually – accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?

Persistence threshold

Persistence time-Out

Wait time

Request threshold

https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/graceful-shutdown.html

NO.70 Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?

Citrix ADC MPX

Citrix ADC VPX

Citrix ADC SDX

Citrix ADC CPX

it is the CPX, which is not a full scale solution. You don’t need a full virtual like VPX to run CPX inside Docker for Linux, that is the budget choice.

NO.71 Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?

Interface 1/1 is bound to VLAN 20, and native VLAN is 20.

Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.

Interface 1/1 is bound to VLAN 20, and native VLAN is 40.

Interface 1/1 is bound to VLAN 20, and native VLAN is 1.

NO.72 Scenario: A Citrix Administrator is configuring a Citrix ADC high availability (HA) pair with an existing primary Citrix ADC with all resources configured. The administrator adds the secondary Citrix ADC in HA and discovers that the configuration on the existing primary was removed and is now the secondary Citrix ADC in the HA pair.
Which two configurations could the administrator have used to prevent this from happening? (Choose two.)

Set the primary Citrix ADC to stay primary in the Configure HA Node settings.

Set the secondary Citrix ADC to stay secondary in the Configure HA Node settings.

Enable HA monitoring on all secondary device interfaces.

Enable HA monitoring on all primary device interfaces.

Forcing the node to stay secondary works on both standalone and secondary nodes. On a standalone node, you must use this option before you can add a node to create an HA pair. When you add the new node, the existing node stops processing traffic and becomes the secondary node. The new node becomes the primary node.
https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/forcing-a-secondary-node-to-stay-secondary.html On a standalone node, you must use this option before you can add a node to create an HA pair. When you add the new node, the existing node continues to function as the primary node, and the new node becomes the secondary node.
https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/forcing-the-primary-node-stay-primary.html

Loading …

Recommended Training Course

One of the best ways to pass a certification exam on the first try is by taking the recommended online course from the vendor to prepare for it. And in the case of 1Y0-241, Citrix recommends that learners must have gained some experience working with the Citrix ADC 13.x through the official training. It is coded CNS 225 “Deploy and Manage Citrix ADC 13.x with Traffic Management”.

This course was designed to help candidates advance their knowledge of the Citrix ADC concepts using a reliable tool. It is a five-day learning program that addresses the essentials of Citrix ADC, including its functionality, licensing, architecture, and platforms. It also covers the topics such as the management of traffic and its optimization, content switching, and others. By completing this course, the candidates gain more details about the major ADC capabilities including the SSL offload, security and performance, and high availability, just to mention a few.

To understand most of the objectives addressed by this program, Citrix advises that all learners must be familiar with the OSI model, networking protocols, networking devices, HTTP, and TCP/IP. Still, the course will be highly beneficial to IT professionals who work with the Citrix ADC on a day-to-day basis but have little to no background experience. This group includes administrators, engineers, and architects who are keen to learn the implementation and management of the Citrix ADC features with the leading industry practices. Finally, training is available in three modes including classroom learning, on-demand, and virtual sessions.

1Y0-241 Practice Exam and Study Guides – Verified By TestKingFree: https://www.testkingfree.com/Citrix/1Y0-241-practice-exam-dumps.html