Latest [Jun 05, 2023] Realistic Verified JN0-104 Dumps [Q64-Q83]

Rate this post

Latest [Jun 05, 2023] Realistic Verified JN0-104 Dumps

Pass Juniper JN0-104 Exam Updated 145 Questions

The certification is ideal for network engineers, network administrators, and other IT professionals who are looking to enhance their skills and expertise in Juniper Networks. The certification exam focuses on configuring and managing Junos OS devices, including routing and switching, security, and network automation. The exam is conducted online and comprises 65 multiple-choice questions, which must be completed within 90 minutes. The passing score for the exam is 65%, and the certification is valid for three years.

NEW QUESTION 64
Which of these routing information sources is preferred by default?

IS-IS level 2

OSPF internal

IS-IS level 1

OSPF external

NEW QUESTION 65
Which statement is true about default route preferences?

RIP is lower than RIPng.

OSPF AS external is lower than OSPF internal.

Direct is lower than Static.

IBGP is lower than EBGP.

NEW QUESTION 66
By default, which routing table is used to store unicast IPv4 routes?

inet.0

inet.1

inet.2

inet.3

NEW QUESTION 67
While working on a Junos device, you receive the message shown in the exhibit.
In this scenario, what should you do to stop the shutdown process?
In this scenario, what should you do to stop the shutdown process?

Issue the request system halt in 0 command

Issue the request system power-off in 0 command

Issue the clear system reboot command

Issue the clear system commit command

https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/clear-system-reboot.html

NEW QUESTION 68
What is the name of the volume containing the software and files used for the day-to-day operation of a device using Junos with upgraded FreeBSD?

/var

/active

/junos

loam

NEW QUESTION 69
Referring to the exhibit.

Click the Exhibit button.
What happens if the packet shown in the exhibit is received by a device running Junos OS?

The packet is received by the RE first and then redirected to the PFE.

The packet is received by the PFE first and then redirected to the RE.

The packet is handled by the PFE alone.

The packet is handled by the RE alone.

IP options are exception traffic
Packets addressed to the chassis, such as routing protocol updates, Telnet sessions, pings, traceroutes, and replies to traffic sourced from the RE;
* IP packets with the IP options field (options in the packet’s IP header are rarely seen, but the PFE was purposely designed not to handle IP options; packets with IP options must be sent to the RE for processing); and
* Traffic that requires the generation of Internet Control Message Protocol (ICMP) messages.

NEW QUESTION 70
Which of these is true about terms in a policy?

A single term can be applied to a protocol or interface, independent of the policy.

Names of terms can only be five characters long.

Once configured, terms of a policy cannot be reordered.

A from statement is optional in a term.

NEW QUESTION 71
Which of these about forwarding table are true? (Choose two)

The forwarding table contains all known routes.

In case of multiple matches, the forwarding table uses the least-specific entry to forward packets.

The forwarding table stores a subset of the information from the routing table.

Incoming packets are compared against existing entries in the forwarding table to determine the next hop.

NEW QUESTION 72
Which of these methods can be used to announce static routes found in the routing table to OSPF peers?

Apply an import policy to the static routes that injects the static routes into OSPF.

Apply an export policy to OSPF that injects the static routes into OSPF.

Apply an export policy to the static routes that injects the static routes into OSPF.

Apply an import policy to OSPF that injects the static routes into OSPF.

NEW QUESTION 73
Exhibit:

You notice traffic destined to 172.31.17.0/24 is traversing an OSPF path rather than BGP Path.
What is causing this behavior?

The 172.31.17.0/24 BGP route is missing a valid default next hop

The 172.31.17.0/24 BGP has a higher route preference

The 172.31.17.0/24 route does not have a valid BGP entry

The 172.31.17.0/24 BGP route’s outgoing interface is down

NEW QUESTION 74
Which of these happens when two devices send frames at the same time resulting in a collision? (Choose two)

The device with the lowest MAC address is allowed to re-transmit first.

Both devices send a jam signal to notify all other devices of the collision.

The device with the highest MAC address is allowed to re-transmit first.

Both devices stop transmitting, wait for a random period of time, verify that the wire is idle, and re-transmit.

NEW QUESTION 75
Click the Exhibit button

What is the next-hop interface for traffic destined to 172.19.52.101 as shown in the exhibit?

ge-0/0/3.0

ge-0/0/0.0

ge-0/0/2.0

ge-0/0/1.0

NEW QUESTION 76
What is the default import routing policy for OSPF?

Accept all OSPF routes and install them into the inet.3 routing table.

Accept all OSPF routes and install them into the inet7.0 routing table.

Accept all OSPF routes and install them into the inet4.0 routing table.

Accept all OSPF routes and install them into the inet.0 routing table.

NEW QUESTION 77
Which two commands will provide the current configuration of the MX1-PE1 BGP group on your router?
(Choose two.)

user@router# show groups | display set | match MX1-PE1

user@router# show | display set | match MX1-PE1

user@router> show configuration | match set | match MX1-PE1

user@router> show configuration | dispalv set | match MX1-PE1

NEW QUESTION 78
What are two logical interface properties? (Choose two.)

duplex

IP address

DLCI

speed

NEW QUESTION 79
Which statement is true about the internal link between the Routing Engine and the Packet Forwarding Engine?

It is only used for exception traffic.

It is an FE link called fxp2.

It is rate limited to avoid DDoS attacks.

It is only used to send the forwarding table from the Routing Engine to the Packet Forwarding Engine.

NEW QUESTION 80
Which of these is an advantage of dynamic routing?

Dynamic routing requires no initial configuration.

Dynamic routing provides DNS services along with IP connectivity, while static routing does not.

Dynamic routing requires less time to implement in a large network, compared to static routing.

Dynamic routing provides redundant IP addresses for end-user devices.

NEW QUESTION 81
Which of these is true about the Junos operating system?

Junos provides separation between control and forwarding planes.

All Juniper devices use the same Junos operating system.

The Junos source code is specific to the device model.

NEW QUESTION 82
Which operational mode command can be used to view detailed interface status, properties, statistics, errors and CoS packet counters?

show interfaces extensive

show interfaces

show interfaces status

show configuration interfaces

NEW QUESTION 83
You are investigating routing problems on a device running the Junos OS. You receive the error shown in the exhibit when you attempt to restart the routing process.
user@router> restart
^
unknown command.
Which statement describes the problem?

You have typed an invalid command.

You must be in configuration mode to restart the routing process.

You do not have permission to restart the routing process.

You must wait until close of business to restart the routing process, based on user-defined policy.

Loading …

To take the JN0-104 exam, candidates must have a basic understanding of networking concepts and protocols, as well as some experience with Junos OS. The exam is available in multiple languages and can be taken at any Pearson VUE testing center.

The Juniper JN0-104 exam is designed for those who are seeking to become proficient in Juniper’s Junos operating system. This certification is a globally recognized accreditation that validates an individual’s knowledge of networking fundamentals, Junos OS fundamentals, user interfaces, routing and switching, security and clustering, and more. The JN0-104 exam is the first step in the Juniper Networks certification program and is a prerequisite for most other Juniper certifications.

Get 2023 Updated Free Juniper JN0-104 Exam Questions and Answer: https://www.testkingfree.com/Juniper/JN0-104-practice-exam-dumps.html