Fortinet NSE7_LED-7.0 Study Guide Archives Updated on Jan 27, 2024 [Q15-Q32]

Rate this post

Fortinet NSE7_LED-7.0 Study Guide Archives Updated on Jan 27, 2024

Download NSE7_LED-7.0 Mock Test Study Material

The NSE7_LED-7.0 exam covers a wide range of topics, including Fortinet Secure SD-WAN, Fortinet Security Fabric, FortiGate firewalls, FortiAnalyzer, and FortiManager. Candidates will be tested on their ability to design, implement, and troubleshoot these solutions in LAN edge environments. They will also need to demonstrate their knowledge of network security concepts, such as VPNs, SSL inspection, IPSec, and NAT.

NEW QUESTION 15
Refer to the exhibit.

Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

FortiSwitch cannot authenticate multiple devices connected to the same port

FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password

FortiSwitch will assign non-802 1X devices to the onboarding VLAN

All EAP messages will be terminated on FortiSwitch

NEW QUESTION 16
Refer to the exhibit

Examine the sections of the configuration shown in the output
What action will FortiGate take when verifying the student certificate through OCSP?

Reject the student certificate if the OCSP server replies that the student certificate status is unknown

Not verify the OCSP server certificate

Use the OCSP URL included in the student certificate to verify the student certificate

Consider the student certificate status as valid if the OCSP server is unreachable

NEW QUESTION 17
Refer to the exhibit

A device connected to port2 on FortiSwitch cannot access the network The port is assigned a security policy to enforce 802 1X authentication While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit Which two scenarios are likely to cause this issue? (Choose two.)

The device is not configured for 802 IX authentication.

The device has been quarantined for 3600 seconds.

The device has been assigned the guest VLAN

The device does not support 802 1X authentication

NEW QUESTION 18
Refer to the exhibit.

Examine the FortiGate user group configuration and the Windows AD LDAP group membership information shown in the exhibit FortiGate is configured to authenticate SSL VPN users against Windows AD using LDAP The administrator configured the SSL VPN user group for SSL VPN users However the administrator noticed that both the student and j smith users can connect to SSL VPN Which change can the administrator make on FortiGate to restrict the SSL VPN service to the student user only?

In the SSL VPN user group configuration set Group Nam to CN-SSLVPN, CN=”users, DC-trainingAD, DC-training, DC-lab

In the SSL VPN user group configuration, change Name to cn=sslvpn, CN=users, DC=trainingAD, Detraining, DC-lab.

In the SSL VPN user group configuration set Group Name to ::;=Domain users.CN-Users/DC=trainingAD, DC-training, DC=lab.

In the SSL VPN user group configuration change Type to Fortinet Single Sign-On (FSSO)

NEW QUESTION 19
Refer to the exhibit.

Examine the IPsec VPN phase 1 configuration shown in theexhibit
An administrator wants to use certificate-based authentication for an IPsec VPN user Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)

Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate

In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN

In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)

Import the CA that signed the user certificate

Enable XAUTH on the IPsec VPN tunnel

NEW QUESTION 20
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

Access VLAN is enabled on the VLAN

The native VLAN configured on the ports is incorrect

The FortiSwitch MAC address table is missing entries

The FortiGate ARP table is missing entries

NEW QUESTION 21
You are setting up an SSID (VAP) to perform RADlUS-authenticated dynamic VLAN allocation Which three RADIUS attributes must be supplied by the RADIUS server to enable successful VLAN allocation” (Choose three.)

Tunnel-Private-Group-ID

Tunnel-Pvt-Group-ID

Tunnel-Preference

Tunnel-Type

Tunnel-Medium-Type

NEW QUESTION 22
Which FortiSwitch VLANs are automatically created on FortGate when the first FortiSwitch device is discovered1?

default quarantine, rspan voice video onboarding and nac_segment

access, quarantine, rspan. voice, video, and onboarding

default quarantine rspan voice video and nac_segment

fortilink. quarantine erspan voice video and onboarding

NEW QUESTION 23

Wireless guest users are unable to authenticate because they are getting a certificate error while loading the captive portal login page.This URL string is the HTTPS POST URL guest wireless users see when attempting to access the network using the web browser

Which two settings are the likely causes of the issue? (Choose two.)

The external server FQDN is incorrect

The wireless user’s browser is missing a CA certificate

The FortiGate authentication interface address is using HTTPS

The user address is not in DDNS form

NEW QUESTION 24
Refer to the exhibit.

Examine the FortiGate configuration FortiAnalyzer logs and FortiGate widget shown in the exhibit An administrator is testing the Security Fabric quarantine automation The administrator added FortiAnalyzer to the Security Fabric and configured an automation stitch to automatically quarantine compromised devices The test device (::.:.:.!) s connected to a managed Fort Switch dev :e After trying to access a malicious website from the test device, the administrator verifies that FortiAnalyzer has a log (or the test connection However the device is not getting quarantined by FortiGate as shown in the quarantine widget Which two scenarios are likely to cause this issue? (Choose two)

The web filtering rating service is not working

FortiAnalyzer does not have a valid threat detection services license

The device does not have FortiClient installed

FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC)

NEW QUESTION 25
You are investigating a report of poor wireless performance in a network that you manage. The issue is related to an AP interface in the 5 GHz range You are monitoring the channel utilization over time.
What is the recommended maximum utilization value that an interface should not exceed?

85%

95%

75%

65%

NEW QUESTION 26
Exhibit.

Exhibit.

Refer to the exhibits
In the wireless configuration shown in the exhibits, an AP is deployed in a remote site and has a wireless network (VAP) called Corporate deployed to it The network is a tunneled network however clients connecting to a wireless network require access to a local printer Clients are trying to print to a printer on the remote site but are unable to do so Which configuration change is required to allow clients connected to the Corporate SSID to print locally?

Configure split-tunneling in the vap configuration

Configure split-tunneling in the wtp-profile configuration

Disable the Block Intra-SSID Traffic (intra-vap-privacy) setting on the SSID (VAP) profile

Configure the printer as a wireless client on the Corporate wireless network

NEW QUESTION 27
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power”?

Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm

Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength

Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm

Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client

NEW QUESTION 28
Refer to the exhibits.

Exhibit.

Examine the troubleshooting outputs shown in the exhibits
Users have been reporting issues with the speed of their wireless connection in a particular part of the wireless network The interface that is having issues is the 2 4 GHz interface that is currently configured on channel 6 The administrator of the wireless network has investigated and surveyed the local RF environment using the tools available at the AP and FortiGate Which configuration would improve the wireless connection?

Change the AP 2 4 GHz channel to 11

Change the AP 2 4 GHz channel to 1.

Change the AP 2 4 GHz channel to 9.

Change the AP 2 4 GHz channel to 13.

NEW QUESTION 29
Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning’?

From an LDAP server using a simple bind operation

From a TFTP server

From a DHCP server using options 240 and 241

From a DNS server using A or AAAA records

NEW QUESTION 30
Refer to the exhibit.

By default FortiOS creates the following DHCP server scope for the FortiLink interface as shown in the exhibit What is the objective of the vci-string setting?