[Q28-Q49] Best Quality 71301X Exam Questions Avaya Test To Gain Brilliante Result!

Rate this post

Best Quality 71301X Exam Questions Avaya Test To Gain Brilliante Result!

Preparations of 71301X Exam 2024 Avaya ACIS Unlimited 136 Questions

Avaya 71301X certification exam covers a wide range of topics, including Avaya Aura® Messaging, Avaya Aura® Conferencing, and Avaya Aura® Contact Center. 71301X exam also covers topics such as installation and configuration, integration with other Avaya products, and troubleshooting. Candidates who pass the exam demonstrate their knowledge of these topics and their ability to apply them in real-world scenarios.

NO.28 On Avaya Session Border Controller for Enterprise (SBCE), where do you access the tool that displays SIP messages, in real time, as they pass through the SBCE?

from Avaya Aura System Manager, navigate to “Session Border Controller for Enterprise > SBCE Administration” menu

from the SBCE EMS Web Console

from the SBCE Server command line via SSH session, using PuTTY

from the traceSIP client installed on a local PC

NO.29 In Avaya Aura Messaging 6.3, which statement is true about Avaya Aura Messaging (AAM) capacities of a system utilizing the Standard Capacity (non-High Capacity) Message Store template?

One Message Store Server supports up to 60000 user mailboxes and you can have 5 active + 1 Redundant Application Servers in a cluster.

One Message Store Server supports up to 6000 user mailboxes and you can have 3 active + 1 Redundant Application Servers in a cluster.

One Message Store Server supports up to 600 user mailboxes and you can have 5 active + 1 Redundant Application Servers in a cluster.

One Message Store Server supports up to 1000 user mailboxes and you can have 3 active + 1 Redundant Application Servers in a cluster.

NO.30 Refer to the exhibit.

Which type of a Configuration Profile in the Avaya Session Border Controller for Enterprise (ASBCE) allows to set Timers, URI Manipulation and Header Manipulation, and can be linked to a SIP Server Profile?

Signaling Manipulation

Routing

Topology Hiding

Server Interworking

NO.31 Which event triggers a Survivable Communication Manager (CM) to accept IP phones registration requests, and put the configured IP trunks in a working condition?

availability of DSP resources from either an Avaya Aura® Media Server (AAMS) and/or a G-series Media Gateway

a lack of a response to an outbound SIP INVITE

a failed IP phone registration attempt

a heartbeat failure of the main CM

NO.32 When installing a new Avaya Session Border Controller for Enterprise (ASBC6) component / device using the EMS GUI, you click on the Install link on the EMS Device Management page.
After briefly displaying the Provisioned status, which final status should the ASBCE component / device display?

Commissioned

Running

Active

NO.33 A user has been informed by the Attendant that a call for them has been parked using the Avaya Call Park and Page running on the Breeze® platform. How can the user retrieve the parked call?

by pressing the Call Park button on their endpoint

by dialing the Answer Back feature access code

by dialing the system-wide Pilot extension

by dialing the Park extension used to park the call

NO.34 In Avaya Aura Messaging (AAM) 6.3, how many Call Answering Ports can one Application Server support?

up to 100 Ports

up to 10 Ports

up to 1000 Ports

up to 10000 Ports

NO.35 Which two key configuration steps are needed to associate the Avaya Call Park and Page snap-in to an Avaya Workplace Client? (Choose two.)

Add an Implicit User Profile.

Add a Service Profile.

Configure a Call Park activation and deactivation feature code.

Add a SIP Entity for the Call Park and Page snap-in.

NO.36 From which interface are the Presence related messages delivered to the Avaya Workplace client.

from the Avaya Breeze® Security Module

from the Avaya Session Manager (SM) Security Module

from Communication Manager (CM)

from the Avaya Breeze® Management Interface

NO.37 Avaya Session Border Controller for Enterprise (ASBCE) provides an integrated (local) WebLM server.
Which ASBCE deployment supports a license file installed on the local WebLM server?

a multi-server deployment with a virtualized EMS and virtualized ASBCEs

a multi-server deployment with a virtualized EMS and hardware based ASBCEs

a single-server virtualized deployment

a single-server hardware-based deployment

NO.38 Which statement about enabling IM and Presence for a user is true?

In SMGR, edit the Communication Profile of the user to assign an Avaya E.164 handle and check the Presence profile checkbox.

In SMGR, edit the Communication Profile of the user to assign an Avaya SIP handle and check the Presence profile checkbox.

In SMGR, edit the Communication Profile of the user to assign a XMPP handle and check the Presence profile checkbox.

In SMGR, edit the Communication Profile of the user to assign an Avaya Presence/IM handle and check the Presence profile checkbox.

NO.39 When registering as a Remote Worker via the Avaya Session Border Controller for Enterprise (ASBCE), which IP address should be configured in the Server List of the Avaya one-X® Communicator?

Avaya Aura® Session Manager (SM) External (Public) Interface IP address allocated for Remote Workers

The Avaya Aura^ Session Manager (SM) Security Module IP Address

ASBCE External (Public) Interface IP address allocated for Remote Workers

ASBCE Internal (Private) Interface IP address allocated for Remote Workers

NO.40 Which three steps are necessary to make a successful Implementation of Avaya Breeze WebRTC Snap-in? (Choose three.)

Load the Snap-in.

Download and Install WebRTC License file.

Busy and Release the WebRTC snap-in.

Manually configure the WebLM IP address in the WebRTC configuration attributes.

Install the Snap-in.

NO.41 A customer reports that when using Presence services, the users cannot see the Presence status.
Which two tools are used to trace a PUBLISH message. In the Avaya Breeze server? (Choose two.)

traceSBC

traceCE

traceSM

tracePRS

tracePS

NO.42 Before running the initTM -f command from the Avaya Breeze® server CLI, what should be verified?

Verify that the Avaya Breeze® is configured as a Managed Element in Avaya Aura® System Manager.

Verify that an enrollment password is configured in Avaya Aura® System Manager, and that it has not expired.

Verify that a valid certificate is installed on the Avaya Breeze® server.

Verify that the Avaya Breeze® server is licensed.

NO.43 When Avaya Aura Presence Services is implemented, which statement is true about Port Management?

It allows multi-media services over a standard Web-Browser.

It allows independent management capabilities to filter out undesired message to every Avaya Aura Presence Services user.

It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.

Port 5222 is used for one-X Endpoints, while Port 5269 is open for connecting with other XMPP 3rd-Party Servers.

NO.44 When planning the Avaya Session Border Controller for an Enterprise (ASBCE) deployment, what is a good practice to adopt?

Use the same name for all internal and external interfaces.

Use the same IP address sub-net for both internal and external Interfaces.

Name interfaces consistently, for example, Al as “Internal” or “Private” for connectivity to the Call Server.

Use dedicated ASBCEs on the internal and external sides of the network.

NO.45 Which three statements about Avaya Breeze are true? (Choose three.)

It allows application developers to quickly add new capabilities to their Avaya solutions.

It is used by Avaya, Partner, and Enterprise Developers.

It does not require a license.

It was formerly called Collaboration POD but has been renamed to Avaya Breeze.

It is a development platform that enables rapid development for applications that are targeted to meet a customer’s communications needs.

NO.46 Which statement about the SIP Entities to support Avaya Aura Presence Services is true?

Only one SIP Entity is built of Type = “Presence Services”, which uses the SM100 IP address of the Avaya Breeze node.

Only one SIP Entity is built of Type = “Engagement Development Platform”, which uses the SM100 IP Address of the Avaya Breeze node.

Two SIP Entities are built to the same SM100 IP address of each node. One is of Type = “Engagement Development Platform”, and the other is of Type = “Other”.

Two SIP Entities are built to the same SM100 IP address of each node. One is of Type = “Engagement Development Platform”, and the other is of Type = “Presence Services”.

NO.47 If more than one Avaya Breeze node is available in the cluster, which statement about redundancy and load-balancing is true?

IM clients point to any Avaya Breeze node SM100 IP address. The client is dynamically informed of alternate Avaya Breeze nodes in the cluster.

The list of all Avaya Breeze nodes SM100 IP addresses must be configured in the client.

The Cluster IP address is not used for Presence Services in 7.0. IM clients configure a FQDN instead of IP address which is resolved by a DNS server to all Avaya Breeze nodes in the cluster.

IM clients point to the Leader Avaya Breeze node SM100 IP address which redirects the clients to a particular Avaya Breeze node based on load-balancing policy.

NO.48 Which statement about the SIP Entities to support single node Avaya Aura Presence Services is true?

Only one SIP Entity is built of Type = “Presence Services”, which uses the SM100 IP address of the Avaya Breeze node.

Only one SIP Entity is built of Type = “Avaya Breeze”, which uses the SM100 IP address of the Avaya Breeze node.

Two SIP Entities are built to the same SM100 IP address of each node. One is of type = “Avaya Breeze”, and the other is of Type = “Presence Services”.

Two SIP Entities are built to the same SM100 IP address of each node. One is of type = “Avaya Breeze”, and the other is of Type = “Other”.

NO.49 After the initial provisioning script has been run you see your Avaya Session Border Controller for Enterprise (SBCE) displaying a Registered state in the Web GUI. You click on the install link in the EMS System Management > Devices menu to continue the installation.
After displaying a status of Provisioning for a short while, which status does the SBCE display?

Commissioned

Busyout

Maintenance-Busy