Download CTAL-TAE Exam Dumps Questions to get 100% Success in ISQI [Q23-Q37]

Rate this post

Download CTAL-TAE Exam Dumps Questions to get 100% Success in ISQI

100% Accurate Answers! CTAL-TAE Actual Real Exam Questions

ISQI CTAL-TAE (ISTQB Certified Tester Advanced Level, Test Automation Engineering) exam is a certification exam that tests the knowledge and skills of individuals in the field of test automation engineering. CTAL-TAE exam is designed to assess the ability of individuals to apply test automation techniques and tools effectively in software development projects.

ISQI CTAL-TAE exam is an advanced-level certification designed for software testers who want to demonstrate their expertise in test automation engineering. ISTQB Certified Tester Advanced Level, Test Automation Engineering certification is suitable for individuals who have already acquired the ISTQB Foundation Level certification and have gained sufficient experience in software testing. Passing the CTAL-TAE exam demonstrates that the candidate has a deep understanding of test automation engineering and is capable of designing, implementing, and managing test automation solutions.

QUESTION 23
Designing the System Under Test (SUT) for testability is important for a good test automation approach and can also benefit manual test execution.
Which of the following is NOT a consideration when designing for testability?

Observability: The SUT needs to provide interface that give insight into the system.

Re-useability: The code written for the SUT must be re-useable for other similar system.

Clearly defined architecture: The SUT Architecture needs to provide clear and understandable interfaces giving control and visibility on all test levels.

Control: the SUT needs to provide interfaces that can be used to perform actions on SUT.

QUESTION 24
Which of the following success factors for a test automation project is TRUE?

Automated tests must be designed to capture only the data that is strictly needed for comparing expected and actual results

The test cases to be automated first must always be selected based on the number of times a test will need to be run

The test cases to be automated must have a high dependency on particular data values

Automated tests that fail due to changes in the requirements of the SUT should be promptly fixed rather than disabled from the test suite

QUESTION 25
A suite of automated test cases was run multiple times on the same release of the SUT in the same test environment. Consider analyzing a test histogram that shows the distribution of test results (pass, fail, etc.) for each test case across these runs. Which of the following potential issues is MOST likely to be identified as a result of such an analysis?

Outliers in test execution times

Security vulnerabilities in automated test cases

Unstable automated test cases

Maintainability issues in automated test cases

QUESTION 26
The last few runs for a suite of automated keyword-driven tests on a SUT were never completed. The test where the run was aborted was not the same between runs. Currently, it is not possible to identify the root cause of these aborts, but only determine that test execution aborted when exceptions (e.g., NullPointerException, OutOfMemoryError) occurred on the SUT by analyzing its log files. Test execution log files are currently generated, in HTML format, by the TAS as follows: all expected logging data is logged for each keyword in intermediate log files. This data is then inserted into the final log file only for keywords that fail, while only a configurable subset of that data is logged for keywords that execute successfully. Which of the following actions (assuming it is possible to perform all of them) would you take FIRST to help find the root cause of the aborts?

Log the stack trace and amount of memory available to the SUT at the start and end of each test in the suite, in the SUT log files

Split the generated log file into smaller parts, load them into external files that are loaded into the browser in transparent mode when needed

Log all expected logging data in the final test execution log file, not only for keywords that fail, but also for keywords that execute successfully

Use appropriate colors to effectively visually highlight different types of information in the test execution log files

QUESTION 27
(Which of the following answers describes the LEAST relevant concern in selecting suitable test automation tools for a test automation project?)

What is the degree of technical knowledge and skills within the test team to implement code-based test automation for the project (e.g., in terms of programming and design patterns)?

In the case of open-source test automation tools, are these tools released under permissive or restrictive licenses, and, if applicable, is it specified whether they can be modified and by whom?

Has the test team been formed with the different personalities of its members in mind, to ensure that the interaction between them is effective in achieving the objectives of the test automation project?

In the case of commercial test automation tools, what factors determine the licensing costs of these tools (e.g., in terms of the maximum number of users supported and whether the license type is fixed or floating)?

QUESTION 28
You have been tasked with adding the execution of build verification tests to the current CI/CD pipeline used in an Agile project. The goal of these tests is to verify the stability of daily builds and ensure that the most recent changes have not altered core functionality. Currently, the first activity performed as part of this pipeline is the static source code analysis. Which of the following stages in the pipeline would you add the execution of these smoke tests to?

As a first activity, before performing static source code analysis and before generating the new build

After performing static analysis on the source code and before generating the new build

After deploying the new build to the test environment and before performing more extensive testing

As a final activity, immediately before releasing the new build into production

QUESTION 29
Consider thefollowing example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?

A and B are both internal TAS metrics

A is an internal TAS metric and B is an external TAS metric

A and b are both external TAS metric

A is and external TAS metric and b is an internal TAS metric

QUESTION 30
You are evaluating the best approach to implement automated tests at the UI level for a web app. Specifically, your goal is to allow test analysts to write automated tests in tabular format, within files that encapsulate logical test steps related to how a user interacts with the web UI, along with the corresponding test data. These steps must be expressed using natural language words that represent the actions performed by the user on the web UI. These files will then be interpreted and executed by a test execution tool. Which of the following approaches to test automation is BEST suited to achieve your goal?

Test-driven development

Keyword-driven testing

Data-driven testing

Linear scripting

QUESTION 31
Which of the following statements about a test progress report produced for an automated test suite is TRUE?

The test progress report should indicate, for each test in the suite, the timestamps related to the test steps

The content of the test progress report should not be affected by the stakeholders to whom the report is intended

The test progress report should indicate the test environment in which the tests were performed

The test progress report should indicate, for each test in the suite, the start and end timestamps of the test

QUESTION 32
Consider a TAS that uses a keyword-driven framework. The SUT is a web application and there is a large set of keywords available for writing the automated tests that relate to highly specific user actions linked directly to the GUI of the SUT. The automated test written with the keywords are statically analyzed by a custom tool which highlight’s repeated instances of identical sequence of keywords. The waiting mechanism implemented by the TAS for a webpage load is based on a synchronous sampling within a given timeout. The TAS allowschecking a webpage load everyseconds until a timeout value

Changing the scripting approach to data-driven scripting

Implementing keywords with a higher level of granularity

Changing the wait mechanism to explicit hard-coded waits

Establishing an error recovery process for TAS and SUT

QUESTION 33
You are currently designing the TAA of a TAS. You have been asked to adopt an approach for automatically generating and executing test cases from a model that defines the SUT. The SUT is a state-based and event-driven that is described by a finite-state machine and exposes its functionality via an API. The behavior of the SUT depends on hardware and communication links that can be unreliable.
Which of the following aspects is MOST important when designing the TAA in this scenario?

Looking for tools that allows direct denoting of exceptions and actions depending on the SUT events.

Adopting a test definition strategy based on classification tree coverage for the test definition layer.

Looking for tools that allow performing setup and teardown of the test suites and the SUT.

Adopting a test definition strategy based on use case/exception case coverage for the definition layer.

QUESTION 34
In a first possible implementation, the automated test scripts within a suite locate and interact with elements of a web UI indirectly through the browsers using browser-specific drivers and APIs, provided by an automated test tool used as part of the TAS. In an alternative implementation, these test scripts locate and interact with elements of the same web UI directly at the HTML level by accessing the DOM (Document Object Model) and internal JavaScript code. The first possible implementation:

Has a higher level of intrusion than the alternative implementation, and therefore its test scripts are less likely to produce false positives

Has a lower level of intrusion than the alternative implementation, and therefore its test scripts are less likely to produce false positives

Has the same level of intrusion as the alternative implementation, and therefore the risk of test scripts producing false positives is the same in both cases

Has a lower level of intrusion than the alternative implementation, and therefore its test scripts are more likely to produce false positives

QUESTION 35
An automated test script makes a well-formed request to a REST API in the backend of a web app to add a single item for a product (with ID = 710) to the cart and expects a response confirming that the product is successfully added. The status line of the API response is HTTP/1.1 200 OK, while the response body indicates that the product is out of stock. The API response is correct, the test script fails but completes, and the message to log is: The product with ID = 710 is out of stock. Cart not updated. When this occurs, you are already aware that both the failed test and the API are behaving correctly and that the problem is in the test data. The TAS supports the following test logging levels: FATAL, ERROR, WARN, INFO, DEBUG. Which of the following is the MOST appropriate test logging level to use to log the specified message?

FATAL

INFO

DEBUG

WARN

QUESTION 36
You are executing the first test run of a test automation suite of 200 tests. All the relevant information related to the state of the SUT and to the automated test execution is stored in a small database. During the Automated test run you observe that the first 10 test pass, while an abnormal termination occurs when executing the 11thtest. This test does not complete its execution and the overall execution of the suite is aborted. An immediate analysis of the abnormal termination is expected to be time consuming and you have been asked to produce a detailed report of the execution results for the first test run, as soon as possible.
What is the MOST important FIRST step to be taken immediately after the abnormal occurred when executing the 11thtest?

Re-run the test automation suite starting from the 12thtest

Return the database to a consistent state that allows subsequent test to run

Take a backup of the database in its current state. So It can be analyzed later

Re-run the test automation suite starting from the 1sttest.

QUESTION 37
Some automated regression test scripts run by a TAS in a given test environment make calls to private APIs that require authentication for all requests (the authentication method is the same for all APIs). The SUT is a business-critical system. The following two changes are planned: a change in the authentication method of all APIs and a minor upgrade of the OS (Operating System) in the test environment. You have updated the test scripts to cope with the change in the API authentication method. Which of the following sequences of activities is BEST to ensure that the test scripts are not adversely affected by these changes?

First implement the change in the API authentication method, then upgrade the OS, and finally run all the updated test scripts

Implement one change at a time and run a subset of the updated test scripts after each change

First upgrade the OS, then implement the change in the API authentication method, and finally run all the updated test scripts

Implement one change at a time and run a subset of the updated test scripts after each change, and finally run all the updated test scripts

Best Value Available! Realistic Verified Free CTAL-TAE Exam Questions: https://www.testkingfree.com/ISQI/CTAL-TAE-practice-exam-dumps.html

Download CTAL-TAE Exam Dumps Questions to get 100% Success in ISQI [Q23-Q37]

Related Posts

Practice CT-AI_v1.0_World Questions With Certification guide Q&A from Training Expert [Q10-Q24]

CTAL-TM_Syll2012 Actual Questions Answers PDF 100% Cover Real Exam Questions [Q28-Q48]

Leave a Reply Cancel reply