2022 Realistic Verified Free Cisco 300-425 Exam Questions [Q56-Q78]

4/5 - (1 vote)

2022 Realistic Verified Free Cisco 300-425 Exam Questions

300-425 Real Exam Questions and Answers FREE

Mobility

In the framework of this domain that covers 25% of the exam questions, the students are required to prove their competence in the following areas:

Designing mobility groups based on the mobility roles;
Improving client roaming;
Verifying mobility tunneling for the control path & data.

NO.56 What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

20%

30%

40%

50%

NO.57 A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?

Paint the access point to cover the LED from being noticeable.

Use enclosures to hide the wireless infrastructure in the surrounding environment.

Use AIR-AP-BRACKET-1 to allow for greater mounting locations

Deploy environmentally friendly cabling components to blend into the environment.

NO.58 When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)

no support for 802.11ac

higher data rates than laptops

fewer antennas than laptops

no support for 802.11r

lower data rates than laptops

NO.59 An engineer must configure the virtual IP address on multiple controllers in a mobility group. Which rule must the engineer follow to ensure proper roaming?

Ensure that the DNS entry is tied to the virtual IP address of the WLC.

Use a unique IP address for each WLC.

Ensure that the DNS Host Name field is defined.

Use the same IP address for each WLC.

NO.60 An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?

best client available

phone client

normal client

worst client available

NO.61 What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

20%

30%

40%

50%

NO.62 A network engineer is designing a new wireless network. The network needs to have these characteristics:

Which approach should be taken?

Deploy APs near each other for 5 GHz coverage, and disable the 2A GHz radios for some Aps.

Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for all APs.

Deploy APs near each other for 5 GHz coverage, and enable the 2.4 GHz radios for all Aps.

Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for some APs.

NO.63 Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?

in the aisle

under the seat

above the stage

under the stage

NO.64 An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?

WLC port groups

RF groups

AP groups

interface groups

NO.65 An engineer must perform an assessment of a customer LAN for a future IEEE 802.11ac Wave 2 wireless deployment All access switches are Fast Ethernet-Capable only, and the wired infrastructure between existing APs and access switches is based on the CAT 6A standard. Which two actions provide maximum support of Cisco 3800 Series access points? (Choose two.)

Replace the existing switches with mGig switches.

Replace the existing switches with gigabit switches with 10G uplinks.

Ensure that cable distances between access switches and APs are not longer than 100 meters.

Replace the existing wiring infrastructure with the CAT-7E wiring standard,

Ensure that cable distances between access switches and APs are not longer than 55 meters.

NO.66 Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?

When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.

When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.

NO.67 A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company’s existing wireless network can support the new system. Which tool in Cisco Prime can help ensure that the current network will support the new phone system?

Location Readiness

Site Calibration

Map Editor

Voice Readiness

NO.68 An engineer must repurpose a lab WLC appliance for use in the production environment of the enterprise. After the new WLC is configured with the information of the other WLC, the mobility tunnels are still not coming up. What is the reason?

A firewall is blocking UDP port 16667 between the WLCs.

The WLC management interfaces are in the same VLAN.

The hardware platform is incompatible.

The mobility groups are different.

NO.69 A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?

hash

AES

WEP

3DES

NO.70 An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)

TSPEC

RXSOP

TPC

LSS

DFS

NO.71 When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)

no support for 802.11ac

higher data rates than laptops

fewer antennas than laptops

no support for 802.11r

lower data rates than laptops

NO.72 An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?

UDP port 16666

IP protocol 97

UDP port 97

TCP port 97

NO.73 An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high cochannel interference. Which profile can be used to adjust the parameters for these high-density APs?

QoS profile

AVC profile

RF profile

ISE profile

NO.74 A network administrator of a global organization is collapsing all controllers to a single cluster located in central Europe. Which concern must addressed?

Some channels may not be available consistently across the organization.

Different RF policies per office are not available in this configuration.

Syslog must be configured to the time-zone of the NMS platform.

Centralized controllers cannot uniformly authenticate global users.

NO.75 An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?

PEAP

PMF

GTK-randomization

NO.76 An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?

UDP port 16666

IP protocol 97

UDP port 97

TCP port 97

NO.77 Which statement about creating a mobility group is true, excluding mobility anchors?

Each WLC must use the same mobility name and be defined as a peer in each other’s static mobility members list.

If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.

The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.

A mobility groups does not require all WLCs in the group to use the same virtual IP address.

NO.78 An engineer is designing an outdoor mesh network to cover several sports fields. The core of the network is located In a building at the entrance of a sports complex Which type of antenna should be used with the RAP for backhaul connectivity?

5 GHz. 8-dBi omnidirectional antenna

2.4 GHz. B-dBi patch antenna

2 4 GHz. 14-dBi omnidirectional antenna

5 GHz. 14-dBi patch antenna