[Q195-Q212] 350-601 Dumps Free Test Engine Player Verified Updated [Feb 11, 2023]

Rate this post

350-601 Dumps Free Test Engine Player Verified Updated [Feb 11, 2023]

Q&As with Explanations Verified & Correct Answers

NO.195 Refer to the exhibit.

Which backup operation type does not include the Preserve Identities feature?

logical configuration

system configuration

full state

all configuration

NO.196 A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.)

Service Profile Compute (Is-compute)

Ext LAN Config (ext-lan-security)

Service Profile Network Policy (Is-network-policy)

Service Profile Config (Is-config)

Ext LAN Policy (ext-lan-policy)

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/Reference-Docs/Privileges/4-1/b-UCSM-Privileges-4_1.pdf NTP can be configured only with EXT LAN Security.
VLAN can be added using the following privileges:
– Ext Lan Config (ext-lan-config)
– Ext Lan Policy (ext-lan-policy)
service profiles will add VLANs to vNICs only if they are configured to UCS manager. So service profile is not valid solution.

NO.197

Refer to the exhibit. An engineer must configure a QoS policy that controls only vHBA traffic. Which policy must be used to meet this requirement?

Best Effort

Fibre Channel

Gold

Platinum

NO.198 A network engineer must create an EEM script that saves a copy of the running configuration on bootflash and writes a message to syslog when a user saves the configuration to a Cisco Nexus switch. Which configuration set should be applied to complete this task?

Option A

Option B

Option C

Option D

Explanation
The command write memory is not valid in NX-OS
The “event-default”

NO.199 Drag and drop the Hyperflex characteristics from the left onto the appropriate Hyper Hex node types on the right.

NO.200 Refer to the exhibit.

Refer to the exhibits An engineer must implement a SPAN session that sends a copy of all VLAN 11 traffic on N5K_1 to the Traffic Capturing Device The configuration that is presented is already applied to the Cisco UCS Manager. Which additional action meets the objective’?

Select the Clear Destination feature.

Choose VLAN 11 under the VSANs section.

Assign the VLAN to the monitored port.

Create a LAN traffic monitoring session.

NO.201 AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to 1500 and then generable a massage. What configuration will accomplish this task?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.202 Refer to the exhibit.

Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used

Explanation

Table Description automatically generated

NO.203 Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true.

Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.

Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.

The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.

The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.

NO.204 Refer to the exhibit.

Which action must be taken before the maintenance policy can be committed?

Specify a maintenance time by selecting a schedule.

Associate a service profile to the maintenance policy.

Set the soft shutdown timer to a specific time.

Set the policy to apply the changes on the next reboot.

Section: Compute
Explanation/Reference:

NO.205 What is an advantage of steaming telemetry over SNMP?

MD-5based authentication on polling

periodic polling of the device status

periodic push-based subscription messages

on-change traps sent to a receiver

NO.206 A Cisco MDS 9000 series storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file?

/mnt/core

/mnt/recovery

/mnt/pss

/mnt/logs

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/ system_management/nx-os/sysmgmt_cli_6-x/sys.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/ system_management/nx-os/sysmgmt_cli_6-x/sys.html#37039

NO.207 A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right

NO.208 APIC EPG Resolution Immediacy is set to “Immediate”.
Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?

If “On demand” is selected, the policy is programmed in the hardware only when the first packet is received through the data path.

If “Immediate” is selected, the policy is programmed in the hardware as soon as the leaf is booted.

The “Immediate” and “On demand” options require a port group to be created on the VDS.

If “On demand” is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG.

Section: Network

NO.209 Refer to the exhibit.

Which result of running the command is true?

The PIM database is deleted.

Multicast traffic forwarding is suspended.

PIM join messages are suspended.

MRIB is flushed

When you restart PIM, the following tasks are performed: The PIM database is deleted. The MRIB and MFIB are unaffected and forwarding of traffic continues. The multicast route ownership is verified through the MRIB. Periodic PIM join and prune messages from neighbors are used to repopulate the database. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/multicast/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_chapter_011.html

NO.210 Refer to Exhibit:

An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4 Which command set will accomplish this?

Option A

Option B

Option C

Option D

NO.211 An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment. Which two roles can be used to configure LAN Connectivity policies? (Choose two.)

network-admin

server-profile

admin

enable

operations

NO.212 A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight management portal.
Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)

device FQDN

device public IP address

device claim code

device ID

device serial number

Explanation
Text Description automatically generated

Diagram, application Description automatically generated with medium confidence

https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ HyperFlex_Installation_Guide_for_Intersight/b_HyperFlex_Installation_Guide_for_Intersight/ b_HyperFlex_Installation_Guide_for_Intersight_chapter_011.html
https://www.cisco.com/c/en/us/support/docs/hyperconverged-infrastructure/hyperflex-hx-dataplatform/
214268-cisco-intersight-hyperflex-installatio.html

Loading …