[Aug 25, 2022] TestKingFree 300-815 dumps & CCNP Collaboration sure practice dumps [Q49-Q73]

Rate this post

[Aug 25, 2022] TestKingFree 300-815 dumps & CCNP Collaboration sure practice dumps

Cisco 300-815 Actual Questions and Braindumps

Career Opportunities and Salary Profile

The Cisco 300-815 exam can offer you a lot of opportunities if you pass it with a high result. After getting certified, you will be able to land jobs, such as a Cisco Voice Engineer, a Cisco Network Engineer, a Network Security Engineer, a UC Engineer, a Collaboration Engineer, or a Technical Consulting Engineer. After choosing your path, you can start earning about an average of $109,353 per year.

What Is 300-815 Exam and Who Is Its Targeted Audience?

This 300-815 Implementing Cisco Advanced Call Control as well as Mobility Services exam checks the applicant’s understanding of various advanced level call control as well as mobility features. Particularly, such an exam is intended for those with a firm grasp of various signaling and media protocols, gateway technologies, Cisco Unified Border element, CM Call Control, and other related concepts. As for its details, the exam needs to be finished within 90 minutes. Also, the applicant requires an account on Pearson VUE to schedule the exam. Thus, the candidate should select Proctored Exams and enter 300-815 as the test number on the Pearson VUE website. As you keep in mind, securing a passing score in the Cisco 300-815 test will push the entrant a step closer to earning the CCNP Collaboration endorsement.

Q49. Drag and drop the commands from the bottom to the blanks in the code to implement a translation rule to allow only 11 digits to be received over a SIP trunk to a SIP provider. The Cisco UCM is currently sending calls to the Cisco Unified Border Element in E.
164 format. Not all options are used.

Q50. An engineer must configure call queuing under a Hunt Pilot. After the engineer receives the audio file that will be played to callers during queuing, which two steps should be taken to complete the configuration? (Choose two.)

Assign the uploaded audio file to the hunting Line Group member’s “User Hold MOH Audio Source

Assign the uploaded audio file to the hunting Line Group member’s “Network Hold MOH Audio Source”.

Upload the audio file in “TFTP File Management” via OS Administration GUI

Assign the uploaded audio file to “Network Hold MOH Source & Announcements” under Hunt Pilot’s Queuing section.

Upload the audio file in “MOH Audio File Management” via CM Administration GUI

Q51.

Refer to the exhibit. Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?

Adjust the service parameter T302 timet to the desired value.

Adjust the service parameter T204 timer to the desired value.

Check the Urgent Priority check box under 9.911 pattern.

Point the emergency pattern directly to the PSTN gateway.

Q52. If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern “123”?

12!

12X (urgent priority set)

1XX (urgent Priority Set)

12[2-5]

Q53. How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?

At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.

At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.

At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.

At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.

Q54. Refer to the exhibit.

Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?

rule 1 /^/+([^1].*)/ /0111/

rule 1/^+1([2-9]..[2-9]……$)/ /1/

rule 1 /^([2-9]..[2-9]……$)/ /1/

rule 1 /^+1([2-9]..[2-9]……$)/ //

Q55. Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?

System > Location Info

Call Routing > Route/Hunt > Local Route Group Names

System > Device Pool

Call Routing > Emergency Location > Emergency Location (ELIN) Groups

Q56. An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?

debug H.323 messages

debug H.225 asn1

debug H.246 asn 1

debug H.225 media

debug H.323 asn 1

Q57. In Cisco Unified Communications Manager, which tool do you use to check SIP traces?

MTP

CCSIP

RTMT

OS Administration Page

Q58. How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?

At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.

At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.

At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.

At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.

Q59. Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)

TokenID

username and secret key

TLS certificates

passwords

FQDN of the servers defined in DNS

Q60.

Refer to the exhibit. Users report that outbound PSTN calls from phones registered to Cisco Unified Communications Manager are not completing. The local service provider in North America has a requirement to receive calls in 10-digit format. The Cisco Unified CM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format. There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider. The dial peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule applied, which is shown in the exhibit. Which rule modified DNIS in the format that the provider is expecting?

rule 1 /^/+([^1].*)/ /0111/

rule 1/^+1([2-9]..[2-9]……$)/ /1/

rule 1 /^([2-9]..[2-9]……$)/ /1/

rule 1 /^+1([2-9]..[2-9]……$)/ //

Q61. An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which two debugs must the administrator turn on? (Choose two).

debug H.245 asn1

debug H.323 message

debug H.225 asn1

debug H.225 media

debug H.323 asn1

Q62. How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?

At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.

At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.

At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.

At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.

Q63. Which two statements are correct with respect to the Client Matter Code setting in the route pattern configuration? (Choose two.)

The Client Matter Code feature does not support overlap sending because the Cisco Unified CM cannot determine when to prompt the user for the code.

If you check the Allow Overlap Sending check box, the Require Client Matter Code check box becomes disabled.

If you check the Allow Overlap Sending check box, you can also check the Require Client Matter Code check box.

The Client Matter Code feature does support overlap sending because the Cisco Unified Communications Manager can determine when to prompt the user for the code.

The Client Matter Code has the option to configure Authorization Level such as in the Forced Authorization Code.

Q64. In Cisco Unified Communications Manager globalized call routing is implemented and must confirm that it is correctly implemented without making a call. Which tool do you use for verification?

Dialed Number Analyzer

Real-Time Monitoring Tool

SDI trace

SDL trace

Q65. An engineer has two cisco UCM Clusters and wants to integrate them using ILS with TLS certificates. Cluster A (pub and 1 subscriber) will be the hub, and Cluster B (pub and 1 subscriber) will be the spoke. Both Clusters have self-signed certificates. The engineer has exchanged Publisher A and subscriber B Tomcat certificates, but the connection fails. What is the cause of the failure?

The password is incorrect.

Cluster IDs are not unique.

The tomcat certificate from Cluster B must be the publisher.

The engineer needs to exchange the CallManager certificate.

Q66. Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?

System > Location Info

Call Routing > Route/Hunt > Local Route Group Names

System > Device Pool

Call Routing > Emergency Location > Emergency Location (ELIN) Groups

Q67. A company has users that are logged in to hunt groups. However, there is a requirement for hunt group configurations to provide an option to turn on audible ringtones when calls to a line group arrive at a phone that is logged out and on a break. This ringtone alerts a logged-out user that there is an incoming call to a hunt list to which the line is a member, but the call does not ring at the phone of that line group member because of the logged-out status. Which action meets this requirement?

Configure the HLog softkey on the phone so that while a user is logged off, it plays an audible tone when a call is missed.

Set the service parameter Party Entrance Tone to True.”

Configure the service parameter hunt group logoff notification and specify the name of the ringtone file.

Set the service parameter Enterprise Feature Access number for hunt group logout and set up an access number

Q68. Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)

Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster.

A unicast music on hold audio source must be configured.

Cisco RIS data collector service must be running on the same server as the Cisco CallManager service.

The maximum number of callers allowed in queue must be 10.

The phone button template must have the Queue Status Softkey configured.

Q69. An IP Telephony administrator is deploying IP phones The administrator has an existing Cisco UCME router with several SCCP & SIP phones registered. The administrator receives a request for a new SIP phone with MAC address 1111 2222.3333 and directory number 2050 to be added in the Cisco UCME. Which two configurations should be added in CME to support this request? (Choose two )

Option A

Option B

Option C

Option D

Option E

Q70. Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)

Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster.

A unicast music on hold audio source must be configured.

Cisco RIS data collector service must be running on the same server as the Cisco CallManager service.

The maximum number of callers allowed in queue must be 10.

The phone button template must have the Queue Status Softkey configured.

Q71. Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?

Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.

Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.

Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.

By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.

Q72. Which description of RTP timestamps or sequence numbers is true?

The sequence number is used to detect losses.

Timestamps increase by the time “carrying” by a packet.

Sequence numbers increase by four for each RTP packet transmitted.

The timestamp is used to place the incoming audio and video packets in the correct timing order (playout delay compensation).

Q73. Refer to the exhibit.

A Cisco Unified Border Element continues to send 180/183 with the required: 100rel header to Cisco UCM. and the call eventually disconnects How is the issue resolved?

Enable ‘SIP ReI1XX Options* and -Early Offer Support” on the SIP Profile Configuration Page in Cisco UCM.

Enable *Early Offer support for voice and video calls” on the SIP Profile Configuration Page in Cisco UCM.

Disable “SIP Rel1XX Options* and ‘Early Offer Support* on the SIP Profile Configuration Page m Cisco UCM.

Disable “Send send-receive SDP in mid-call INVITE* on the SIP Profile Configuration Page in Cisco UCM.

Cisco 300-815 CLACCM exam, which is also called Implementing Cisco Advanced Call Control and Mobility Services, will give you access to two certifications: CCNP Collaboration and Cisco Certified Specialist – Collaboration Call Control and Mobility Implementation. These are the professional and specialist-level certificates, respectively, offered by Cisco, arguably the best technology firm in the world.

300-815 is not the only requirement to fulfill to earn CCNP Collaboration. To get accredited, the candidates also have to pass the core test, 350-801 CLCOR. There are no specific prerequisites for 300-815 exam, so all you need is a proper understanding of networking technologies and Cisco collaboration solutions.

Latest 300-815 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://www.testkingfree.com/Cisco/300-815-practice-exam-dumps.html