[Q39-Q59] Jul-2023 Realistic 300-610 Accurate & Verified Answers As Experienced in the Actual Test!

Rate this post

Jul-2023 Realistic 300-610 Accurate & Verified Answers As Experienced in the Actual Test!

Latest Cisco 300-610 Practice Test Questions, Designing Cisco Data Center Infrastructure Exam Dumps

Passing the Cisco 300-610 exam requires a deep understanding of data center infrastructure design principles and the ability to apply these principles to real-world situations. Candidates must also have a thorough understanding of Cisco data center technologies and solutions, including Cisco ACI, Cisco UCS, and Cisco Nexus switches. Additionally, candidates must be familiar with automation tools and techniques, as well as security best practices for data center infrastructure.

 

QUESTION 39
Drag and drop the configurations from the left onto the correct policies on the right.

QUESTION 40
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?

 
 
 
 

QUESTION 41
An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes. Which solution should be implemented in the design?

 
 
 
 

QUESTION 42
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

 
 
 
 

QUESTION 43
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

QUESTION 44
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

QUESTION 45
An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.
Which identifier must be used?

 
 
 
 

QUESTION 46
A customer needs to deploy a three-tier network architecture that will consist of web, app, and other businesscritical applications. The solution will include Cisco UCS 6324 Fabric Interconnects managing B and C series servers. The fabric interconnects will be connected to the Cisco Nexus 7706 Series Switch for network access.
A storage array will be directly connected to the UCS fabric interconnects.
Which UCS deployment type must be used to meet these requirements?

 
 
 
 

QUESTION 47
Drag and drop the technologies from the left onto the correct descriptions on the right.

QUESTION 48
Drag and drop the technologies from the left onto the correct descriptions on the right.

QUESTION 49
Drag the appropriate from the left onto the current UDLD modes of operation on the right.

QUESTION 50
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

 
 
 
 
 

QUESTION 51
An engineer seeks a solution to retrieve routing information from Cisco Nexus switches. The data must be exported to a web application in a JSON or XML data format for monitoring and must be encrypted during transmission. The solution must not require extensive knowledge to support and should be simple to implement.
Which technology accomplishes these goals?

 
 
 
 

QUESTION 52
What are two advantages of using Cisco vPC as compared to traditional access layer designs? (Choose two.)

 
 
 
 
 

QUESTION 53
A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array. Which design steps must be used to meet these requirements?

 
 
 
 

QUESTION 54
Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?

 
 
 
 

QUESTION 55
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?

 
 
 
 

QUESTION 56
A company needs a solution to virtualize their legacy desktop computers. The solution must be highly resilient and able to withstand the loss of a data center site.
Each compute node requires a minimum of 20 disk drives.
Which solution meets these requirements?

 
 
 
 

QUESTION 57
A company purchased a Cisco UCS system with four 5108 Chassis populated with UCS B-Series servers. The environment consists of nine Cisco HyperFlex rack servers.
An engineer must provision virtual machines using an orchestration tool to optimize overall deployment time.
Which orchestration must be used to meet this requirement?

 
 
 
 

QUESTION 58
Which orchestration tool should be used for the management and analytics of servers across multiple sites?

 
 
 
 

QUESTION 59
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.


Which Skills Are Covered in the Exam?

This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:

1. Network Design

  • Weightage allotted – 35%

    This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.

In Conclusion

Pass 300-610 exam along with the core test 350-601, and the CCNP Data Center certificate will be yours! Allocate some time to scrutinize the official outline and create a study plan — good preparation is a key to success in the test. Use training options offered by the vendor itself, supplement them with credible third-party materials, and your knowledge will help you ace the exam and perform well in the workplace then.

 

Free 300-610 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://www.testkingfree.com/Cisco/300-610-practice-exam-dumps.html

         

Related Links: myportal.utt.edu.tt www.slideshare.net www.notebook.ai backloggd.com www.slideshare.net myportal.utt.edu.tt

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below