[2023] Use Valid New NS0-162 Test Notes & NS0-162 Valid Exam Guide [Q17-Q36]

Rate this post

[2023] Use Valid New NS0-162 Test Notes & NS0-162 Valid Exam Guide

NS0-162 Actual Questions Answers PDF 100% Cover Real Exam Questions

The Network Appliance NS0-162 exam is divided into several sections, each of which focuses on a specific area of NetApp ONTAP data management. The first section covers NetApp ONTAP architecture, including the various components that make up the software. The second section focuses on installation and configuration, covering topics such as cluster configuration, networking, and security. The third section covers data protection, including backup and recovery, disaster recovery, and data replication. The fourth and final section covers data management, including performance tuning, data migration, and storage efficiency.

QUESTION 17
You ate the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all NAS volumes. One of your users accidentally deleted an Important spreadsheet file on an SMB share. The file needs to be restored as quickly as possible by the Windows user.
Which statement is correct in this scenario?

In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy It to the original location.

In ONTAP System Manager, navigate to the volume where the share resides, click on snapshot copies and restore the latest Snapshot copy.

On the cluster CLI, execute the volume snapshot restore-file command with the options to select the Snapshot, path, and restore-path

On the cluster CLI, execute the volume clone create command with the -parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back.

QUESTION 18
You are asked to investigate possible solutions for increasing the performance of a read-intensive, NFSv3 workload in your FAS environment.
Which two NetApp technologies would satisfy this requirement? (Choose two.)

Flash Pool

FlexVol

FlexCache

FabricPool

QUESTION 19
Exhibit.

You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)

SMB

NVMe

ISCSI

NFS

QUESTION 20
You have a 4-node cluster with a NetApp AFF A400 HA pair and a NetApp FAS8700 HA pair running NetApp ONIAP 9.8 software. You are required to set up 2-factor authentication for the ONTAP CU.
Which two authentication methods are required in this scenario? (Choose two.)

public key

Security Assertion Markup Language (SAML)

IP security (IPsec)

password

QUESTION 21
You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to Join the existing Active Directory? (Choose three.)

Create DNS entries.

Create a data LIF.

Create export policies.

Create NTP entries.

Create a cluster LIF.

Before creating an SMB server in an Active Domain controller, you must ensure that the cluster time and the time on the domain controllers of the domain to which the SMB server will belong matches to within five minutes. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-cifs-cg%2FGUID-5AE3CADE-5EF1-403B-A664-2DEA9F13B0C8.html

QUESTION 22
Exhibit.

You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task?

Active 1Q Unified Manager

NetApp Interoperability Matrix (IMT)

Active IQ Conflg Advisor

NetApp Hardware Universe (HWU)

QUESTION 23
Click the Exhibit button.
You have a new AFF A400 with a switched 10 GbE cluster interconnect.
Referring to the exhibit, which statement is true about utilizing free ports on slot 3 for the data connection?

Free ports can be used as a 10 GbE connection.

Slot 3 is used as the acceleration card and the cluster interconnect.

Ports in slot 3 can be used for 40/100 GbE data connections.

The ports in slot 3 cannot be used in any scenario.

QUESTION 24
You are using NetApp Volume Encryption (NVE) on an AFF system.
In this scenario, which two key-management solutions are supported for NVE? (Choose two.)

an XTS-AES-256 key manager

a KMIP server

an SSH key manager

the onboard key management service

QUESTION 25
Exhibit.

You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?

Add NFSv4 to the access protocols.

Enable Kerberos in the export policy.

Add SMB/CIFS to the access protocols.

Add HOST 3’s IP address to the NFS export policy.

QUESTION 26
Exhibit

You need to provision a new NFS datastore for a vSphere cluster. You configure a new SVM and a new volume on your ONTAP cluster. You successfully mount the datastore to your vSphere cluster. You are able to upload and download a test 1 KB file to and from the datastore. You can also successfully ping the NFS LIF (192.168.106.11) from the vSphere hosts without any packet loss. However, you are unable to upload ISO Images or migrate VMs to the new datastore.
Referring to the exhibit, which action would correct the problem?

Enable jumbo frames on the network switches.

Add a default gateway to the SVM.

Change the MTU of the VM kernel ports on the vSphere hosts to 9,000 bytes.

Migrate the LIF to Its home port.

QUESTION 27
Exhibit.

Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?

FC has not been licensed on the cluster.

NVMe Is not configured for the SVM.

FC switch zoning has not been done correctly.

NVMe is not licensed on the cluster.

QUESTION 28
Your company runs a NetApp AFF A220 cluster as a file server for NFS and SMB. You want to use one of the unused ports to connect a single Windows host directly, using FC. You have converted the UTA2 ports e0e and e0f to FC and equipped them with a 16-Gbps FC transceiver. Your Windows host fails to connect to the storage.
In this scenario, which action solves the problem?

Use an FC switch between storage and host.

Use the arbitrated loop topology on storage and host.

Use the point-to-point topology on all ports.

Use an Ethernet switch between storage and host.

QUESTION 29
You ate the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all NAS volumes. One of your users accidentally deleted an Important spreadsheet file on an SMB share. The file needs to be restored as quickly as possible by the Windows user.
Which statement is correct in this scenario?

On the cluster CLI, execute the volume clone create command with the -parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back.

On the cluster CLI, execute the volume snapshot restore-file command with the options to select the Snapshot, path, and restore-path

In ONTAP System Manager, navigate to the volume where the share resides, click on snapshot copies and restore the latest Snapshot copy.

In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy It to the original location.

QUESTION 30
Click the Exhibit button.
A company has three servers that are using the iSCSI protocol to connect to a 2 node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. When you check the ONTAP cluster, you notice that the servers are togging into only the first controller.
Referring to the exhibit, which two steps do you take to troubleshoot the issue? (Choose two.)

Verify that the UFs are up.

Verify that the ISCSI data protocol has been enabled on the ports.

Verify that each server has been rebooted.

Verify that the controller has not been taken over.

QUESTION 31
You want to scale out storage performance for read-Intensive data across multiple locations. In this scenario, which NetApp feature accomplishes this task?

FlexClone

FlexVol

FlexCache

Flash Pool

QUESTION 32
Which command parameter will result in a thin-provisioned LUN?

-space-allocation enabled

-space-reservation disabled

-space-gurantee none

-space-guarantee volume

QUESTION 33
You are asked to separate replication and data traffic into their own individual VLANs. You created two new VLANs and need to create logical interfaces (LIFs).
In this scenario, what must you do before creating the LIFs?

Create an interface group.

Create a firewall policy.

Create a network subnet.

Create a broadcast domain.

QUESTION 34
Exhibit.

A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?

Allow the file type *, rtf In the CIFS Server fpolicy.

Let the user save the file to a writeable location.

Synchronize the ONTAP Cluster time to the Active Directory time.

Set the user permission for the share to write.

QUESTION 35
You want to add SSDs to existing HDD aggregates.
Which NetApp tool helps you to validate how many SSDs would Improve performance?

OnCommand Workflow Automation

Active IQ Unified Manager

ONTAP System Manager

Automated Workload Analyzer

QUESTION 36
Exhibit.

Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?