Updated Jan-2025 100% Cover Real HPE7-A02 Exam Questions Make Sure You 100% Pass [Q21-Q40]

Rate this post

Updated Jan-2025 100% Cover Real HPE7-A02 Exam Questions Make Sure You 100% Pass

HPE7-A02 dumps Accurate Questions and Answers with Free and Fast Updates

HPE7-A02 exam is a comprehensive test that covers a wide range of topics related to network security, including wireless security, firewall technologies, VPN technologies, intrusion prevention and detection, and network access control. HPE7-A02 exam consists of 60 multiple-choice questions and candidates are given 90 minutes to complete the exam. A passing score of 70% or higher is required to obtain the certification.

NO.21

(Note that the HPE Aruba Networking Central interface shown here might look slightly different from what you see in your HPE Aruba Networking Central interface as versions change; however, similar concepts continue to apply.) An HPE Aruba Networking 9×00 gateway is part of an HPE Aruba Networking Central group that has the settings shown in the exhibit. What would cause the gateway to drop traffic as part of its IDPS settings?

Its site-to-site VPN connections failing

Traffic matching a rule in the active ruleset

Its IDPS engine failing

Traffic showing anomalous behavior

NO.22 A company has HPE Aruba Networking APs running AOS-10 and managed by HPE Aruba Networking Central. The company also has AOS-CX switches. The security team wants you to capture traffic from a particular wireless client. You should capture this client’s traffic over a 15-minute time period and then send the traffic to them in a PCAP file. What should you do?

Access the CLI for the client’s AP. Set up a mirroring session between its radio and a management station running Wireshark.

Go to the client’s AP in HPE Aruba Networking Central. Use the “Security” page to run a packet capture.

Go to that client in HPE Aruba Networking Central. Use the “Live Events” page to run a packet capture.

Access the CLI for the client’s AP’s switch. Set up a mirroring session between the AP’s port and a management station running Wireshark.

NO.23 You have created a Web-based Health Check Service that references a posture policy. You want the service to trigger a RADIUS change of authorization (CoA) when a client receives a Healthy or Quarantine posture. Where do you configure those rules?

In a RADIUS enforcement policy

In the Agents and Software Updates > OnGuard Settings

In the posture policy

In a WEBAUTH enforcement policy

NO.24 HPE Aruba Networking Central displays an alert about an Infrastructure Attack that was detected.
You go to the Security > RAPIDS events and see that the attack was “Detect adhoc using Valid SSID.” What is one possible next step?

Make sure that you have tuned the threshold for that check as false positives are common for it.

Make sure that clients have updated drivers, as faulty drivers are a common explanation for this attack type.

Use HPE Aruba Networking Central floorplans or the detecting AP identities to locate the general area for the threat.

Look for the IP address associated with the offender and then check for that IP address among HPE Aruba Networking Central clients.

NO.25 A company has HPE Aruba Networking gateways that implement gateway IDS/IPS. Admins sometimes check the Security Dashboard, but they want a faster way to discover if a gateway starts detecting threats in traffic.
What should they do?

Use Syslog to integrate the gateways with HPE Aruba Networking ClearPass Policy Manager (CPPM) event processing.

Integrate HPE Aruba Networking ClearPass Device Insight (CPDI) with Central and schedule hourly reports.

Set up email notifications using HPE Aruba Networking Central’s global alert settings.

Set up Webhooks that are attached to the HPE Aruba Networking Central Threat Dashboard.

NO.26 A company wants to turn on Wireless IDS/IPS infrastructure and client detection at the high level on HPE Aruba Networking APs. The company does not want to enable any prevention settings.
What should you explain about HPE Aruba Networking recommendations?

HPE Aruba Networking recommends turning on both wired and wireless prevention whenever you enable detection at high.

HPE Aruba Networking recommends using hybrid AP mode, as opposed to Air Monitors (AMs), when implementing detection without prevention.

HPE Aruba Networking recommends disabling client detection when you configure infrastructure detection at high, as infrastructure detection includes all the client checks and more.

HPE Aruba Networking recommends configuring infrastructure and client detection at a custom level and disabling or tuning some of the settings that are likely to produce false positives.

NO.27 You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VoIP phones are assigned to the “voice” role and need to send traffic that is tagged for VLAN 12. Where should you configure VLAN 12?

As the trunk native VLAN on edge ports and the trunk native VLAN on the “voice” role.

As the allowed trunk VLAN in the “voice” role (and not in the edge port settings).

As a trunk allowed VLAN on edge ports and the trunk native VLAN in the “voice” role.

As the trunk native VLAN in the “voice” role (and not in the edge port settings).

NO.28 An AOS-CX switch has been configured to implement UBT to two HPE Aruba Networking gateways that implement VRRP on the users’ VLAN. What correctly describes how the switch tunnels UBT users’ traffic to those gateways?

The switch always sends the users’ traffic to the VRRP master.

The switch always sends all users’ traffic to the primary gateway configured in the UBT zone.

The switch always load shares the users’ traffic across both gateways.

The switch always sends all users’ traffic to the gateway assigned as the active device designed gateway.

NO.29 You are using Wireshark to view packets captured from HPE Aruba Networking infrastructure, but you’re not sure that the packets are displaying correctly. In which circumstance does it make sense to configure Wireshark to ignore protection bits with the IV for the 802.11 protocol?

When the traffic was captured on the data plane of an HPE Aruba Networking gateway and sent to a remote IP.

When the traffic was mirrored from an AOS-CX switch port connected to an AP.

When the traffic was captured from an AP with HPE Aruba Networking Central.

When the traffic was captured on the control plane of an HPE Aruba Networking MC and sent to a remote IP.

NO.30 A company needs to enforce 802.1X authentication for its Windows domain computers to HPE Aruba Networking ClearPass Policy Manager (CPPM). The company needs the computers to authenticate as both machines and users in the same session.
Which authentication method should you set up on CPPM?

TEAP

PEAP MSCHAPv2

EAP-TTLS

EAP-TLS

NO.31 A company wants you to integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one aspect of the integration that you should explain?

CPPM no longer supports any Device Profiler features and relies on CPDI for this profile information.

CPDI must be configured as an audit server on CPPM for the integration to be successful.

CPDI must have security analysis disabled on it for the integration to be successful.

CPPM can submit profile information to CPDI, but if CPDI derives a different classification, CPDI takes precedence.

When integrating ClearPass Policy Manager (CPPM) with ClearPass Device Insight (CPDI), it is important to understand how device profiling and classification work between the two solutions:
1. CPPM and CPDI Integration Overview
* CPPM is primarily used for access control and policy enforcement, while CPDI specializes in device profiling and classification through advanced analytics and machine learning.
* Integration allows CPPM to leverage CPDI’s enhanced profiling capabilities for more accurate device identification and policy enforcement.
2. Detailed Analysis of Each Option
A: CPPM no longer supports any Device Profiler features and relies on CPDI for this profile information:
* Incorrect: CPPM still supports its own basic device profiling features and can operate independently.
However, when integrated with CPDI, CPPM can use CPDI’s advanced profiling capabilities as a supplement.
B: CPDI must be configured as an audit server on CPPM for the integration to be successful:
* Incorrect: CPDI is not configured as an audit server on CPPM. Integration is achieved via API integration and communication between the two solutions, not through audit server settings.
C: CPDI must have security analysis disabled on it for the integration to be successful:
* Incorrect: Security analysis does not need to be disabled for integration. In fact, CPDI’s security analysis enhances the classification process by identifying anomalous behaviors.
D: CPPM can submit profile information to CPDI, but if CPDI derives a different classification, CPDI takes precedence:
* Correct:
* CPPM and CPDI exchange profile data, but CPDI has more advanced device classification capabilities due to its machine learning-based engine.
* When CPDI derives a different classification than CPPM, CPDI’s classification is considered more accurate and takes precedence.
* This ensures that policies are based on the most reliable device classification.
References
* Aruba ClearPass Policy Manager and Device Insight Integration Guide.
* ClearPass Device Profiling and Classification Documentation.
* Best Practices for CPPM and CPDI Integration in Network Security.

NO.32 You are setting up HPE Aruba Networking SSE to prohibit users from uploading and downloading files from Dropbox. What is part of the process?

Adding a web category that includes Dropbox

Installing the HPE Aruba Networking SSE root certificate on clients

Deploying a connector that can reach the remote users

Deploying a connector that can reach Dropbox

NO.33 A company has HPE Aruba Networking APs (AOS-10), which authenticate clients to HPE Aruba Networking ClearPass Policy Manager (CPPM). CPPM is set up to receive a variety of information about clients’ profile and posture. New information can mean that CPPM should change a client’s enforcement profile.
What should you set up on the APs to help the solution function correctly?

In the security settings, configure dynamic denylisting.

In the RADIUS server settings for CPPM, enable Dynamic Authorization.

In the WLAN profiles, enable interim RADIUS accounting.

In the RADIUS server settings for CPPM, enable querying the authentication status.

NO.34 The following firewall role is configured on HPE Aruba Networking Central-managed APs:
wlan access-rule employees
index 3
rule any any match 17 67 67 permit
rule any any match any 53 53 permit
rule 10 5 5.0 255.255 255.0 match any any any deny
rule 10.5 0.0 255.255 0.0 match 6 80 80 permit
rule 10.5 0.0 255.255.0.0 match 6 443 443 permit
rule 10.5.0.0 255.255.0.0 match any any any deny
rule any any match any any any permit
A client has authenticated and been assigned to the employees role. The client has IP address 10.2.2.2. Which correctly describes behavior in this policy?

HTTPS traffic from 10.2.2.2 to 10.5.5.5 is denied.

HTTPS traffic from 10.2.2.2 to 203.0.113.12 is denied.

Traffic from 10.5.3.3 in an active HTTPS session between 10.2.2.2 and 10.5.3.3 is permitted.

Traffic from 198.51.100.12 in an active HTTP session between 10.2.2.2 and 198.51.100.12 is denied.

NO.35 What is a benefit of Online Certificate Status Protocol (OCSP)?

It lets a device determine whether to trust a certificate without needing any root certificates installed.

It lets a device query whether a single certificate is revoked or not.

It lets a device download all the serial numbers for certificates revoked by a CA at once.

It lets a device dynamically renew its certificate before the certificate expires.

NO.36 A company is using HPE Aruba Networking ClearPass Device Insight (CPDI) (the standalone application). In the CPDI security settings, Security Analysis is On, the Data Source is ClearPass Device Insight, and Enable Posture Assessment is On. You see that a device has a Risk Score of 90.
What can you know from this information?

The posture is unknown, and CPDI has detected exactly four vulnerabilities on the device.

The posture is healthy, but CPDI has detected multiple vulnerabilities on the device.

The posture is unhealthy, and CPDI has also detected at least one vulnerability on the device.

The posture is unhealthy, but CPDI has not detected any vulnerabilities on the device.

NO.37 A company wants to apply role-based access control lists (ACLs) on AOS-CX switches, which are implementing authentication to HPE Aruba Networking ClearPass Policy Manager (CPPM). The company wants to centralize configuration as much as possible. Which correctly describes your options?

You can configure the role on CPPM; however, the CPPM role must reference a policy name that is configured on the switch.

You can configure the role name on CPPM; however, the role settings, including policy and classes, must be configured locally on the switch.

You can configure the role, its policy, and the classes referenced in the policy all on CPPM.

You can configure the role and its policy on CPPM; however, the classes referenced in the policy must be configured locally on the switch.

NO.38 A company lacks visibility into the many different types of user and loT devices deployed in its internal network, making it hard for the security team to address those devices.
Which HPE Aruba Networking solution should you recommend to resolve this issue?

HPE Aruba Networking Mobility Conductor

HPE Aruba Networking ClearPass Device Insight (CPDI)

HPE Aruba Networking Network Analytics Engine (NAE)

HPE Aruba Networking ClearPass OnBoard

NO.39 You need to set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to provide certificate- based authentication of 802.1X supplicants. How should you upload the root CA certificate for the supplicants’ certificates?

As a ClearPass Server certificate with the RADIUS/EAP usage.

As a ClearPass Server certificate with the Database usage.

As a Trusted CA with the AD/LDAP usage.

As a Trusted CA with the EAP usage.

NO.40 A company uses HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI) and has integrated the two. CPDI admins have created a tag. CPPM admins have created rules that use that tag in the wired 802.1X and wireless 802.1X services’ enforcement policies.
The company requires CPPM to apply the tag-based rules to a client directly after it learns that the client has that tag.
What is one of the settings that you should verify on CPPM?

The “Device Sync” setting is set to 1 in the ClearPass Device Insight Integration settings.

Both 802.1X services have the “Profile Endpoints” option enabled and an appropriate CoA profile selected in the Profiler tab.

Both 802.1X services have the “Use cached Role and Posture attributes from the previous sessions” setting.

The “Polling Interval” is set to 1 in the ClearPass Device Insight Integration settings.

The Aruba Certified Network Security Professional certification is recognized globally and is highly valued in the IT industry. Obtaining this certification will not only enhance an individual’s knowledge and skills in wireless network security but will also increase their credibility and career opportunities. Passing the HPE7-A02 exam is a significant achievement that demonstrates an individual’s commitment to professionalism and excellence in the field of wireless network security.

Real HPE7-A02 Quesions Pass Certification Exams Easily: https://www.testkingfree.com/HP/HPE7-A02-practice-exam-dumps.html