Pass SAP C-TS422-2022 exam questions – convert Test Engine to PDF [Q26-Q42]

4/5 - (1 vote)

Pass SAP C-TS422-2022 exam questions – convert Test Engine to PDF

Pass Your C-TS422-2022 Exam Easily – Real C-TS422-2022 Practice Dump Updated Feb 15, 2025

SAP C-TS422-2022 Exam Syllabus Topics:

Topic	Details
Topic 1	Introduction to SAP S 4HANA Production Planning: This section covers production planning components and how to distinguish consumption-focused planning vs. MRP.
Topic 2	Lean Manufacturing in SAP S 4HANA: This section identifies repetitive manufacturing-specific master data and describes line load planning. It also covers describing Kanban master data and Kanban processes.
Topic 3	Demand Management in SAP S 4HANA: This section explains and compare various production techniques in make-to-order, assembly strategizing, and make-to-stock.
Topic 4	Process Orders in SAP S 4HANA: This section covers process order elements and process order processing. It concerns the understanding of master data objects and identifying features for Good Manufacturing Practices.
Topic 5	Material Requirements Planning in SAP S 4HANA: This section covers choosing and implementing planning strategies and using the planning table to ensure long-term planning. This covers mastering production scheduling and explaining MRP basics as well as lot size processes.
Topic 6	Master Data in SAP S 4HANA: This section of the exam covers describing and pinpointing production-relevant master data such as bill of material, routing, and production version.

Q26. In documentation for MRP in Advanced Planning, you read that new orders are created through infinite planning. What does this mean for the capacity requirements of a new order?

MRP assigns the capacity requirements automatically to work centers with the earliest available capacity.

MRP assigns the capacity requirements automatically after the last scheduled order on a work center.

MRP creates the capacity requirements without checking the work center capacities.

MRP creates the capacity requirements only if the work center has sufficient capacity.

Q27. When you create a sales order
When can consumption of planned independent requirements take place for planning strategy 40 (Planning with final assembly?

When MRP creates a dependent requirement

When MRP creates a planned order

When you create a sales order

When MRP creates a planned order

Q28. You Have a scheduling agreement with a vendor, you want classic MRP to automatically create schedule lines in case of material shortage, what must you do?
Note: there are 2 correct answers to this question.

Add the agreement to the source list and mark it for MRP relevance.

Set the creation indicator for purchase requisition on the initial screen of the MRP run.

Add the agreement to the quota arrangement and mark it for MRP relevance.

Set the creation indicator for delivery schedule lines on the initial screen the MRP run.

Q29. During production order creation, several valid production versions are found. How does the system choose the production version?

Lot size or material cost

Validity period or sales order

Planned order or material number

Alphanumeric or quota arrangement

Q30. in your Plant, MRP is activated.
which options do you have to exclude a material from the MRP run?
Note: there are 2 correct answers to this question.

Use a specific material status

Use a specific material group

Use a specific MRP type

Use a specific MRP list

Q31. Which materials have a negative quantity in a bill of material or in a recipe?
Note: There are 3 correct answers to this question

Continuous flow materials

Bulk materials

By-products

Co-products

Waste products

Q32. where does the system check master data selection settings during the creation of planned orders and production orders?
Note: There are 3 Correct answers to this question.

in the bill of material (BOM)

in the work centers

in the MRP controller

In the routing

in the production version

Q33. You are trying to create a production order and NO valid production version can be selected. What could be the reasons?
Note: There are 2 correct answers to this question.

NO bills of material (BOMs) are assigned to the production versions.

All production versions for the material are locked.

The order lot size is NOT within the validity range of a production version.

NO production lines are assigned to the production versions..

A production version is a master data object that links a bill of material (BOM) and a routing or a production process model (PPM) for a material. A production version is required for creating a production order in SAP S/4HANA, as it determines the components, operations, and resources that are needed for producing the material. You can create a production version manually or automatically using the CS_BOM_PRODVER_MIGRATION02 report1.
If you are trying to create a production order and no valid production version can be selected, it could be because of the following reasons:
No bills of material (BOMs) are assigned to the production versions (A): A BOM is a master data object that defines the components and the quantities that are required for producing a material. A production version must have a valid BOM assigned to it, otherwise it cannot be used for creating a production order. You can assign a BOM to a production version on the MRP 4 tab page of the material master2.
The order lot size is not within the validity range of a production version : A production version has a validity range that defines the period and the lot size interval in which it can be used for production planning. The validity range is maintained on the MRP 4 tab page of the material master2. If the order lot size (the quantity of the material to be produced) is not within the lot size interval of any production version, then no valid production version can be selected for creating a production order.
The other options are not valid reasons for not being able to select a production version for creating a production order:
All production versions for the material are locked (B): A production version can have a status that indicates whether it is active or locked. A locked production version cannot be used for production planning, but it can still be selected for creating a production order. However, the system will issue a warning message that the production version is locked and ask for confirmation before proceeding with the order creation3.
No production lines are assigned to the production versions (D): A production line is an organizational unit that represents a group of resources that are used for producing a material. A production line can be assigned to a production version on the MRP 4 tab page of the material master2. However, this assignment is optional and not mandatory for creating a production order. A production line can be used for grouping production versions for reporting or analysis purposes, but it does not affect the selection of a production version for creating a production order4.
References:

Q34. Your production planners must execute planning only for specific resources. How can you achieve this in Advanced Planning (PP/DS)?

Use a propagation range.

Use a resource group

Use a planning area.

Use a planning group.

Q35. Your company manufactures materials whose specifications differ for each manufacturing process. Which application do you have to use in SAP S/4HANA to be able to track and use this information in all areas of logistics?

Engineering change management

Quality management

Process order management

Batch management

Q36. What could be the reason for different combinations of components in a multiple bill of material (BOM)?
Note: There are 2 correct answers to this question.

BOM header status

Manufacturing date

Lot size

BOM item status

Q37. Which of the following elements does MRP take into account during net requirement calculation? Note:
There are 2 correct answers to this question.

Forecast key figures

Safety Stock

Maximum stock level

Purchase orders

Q38. What can you use heuristics in Advanced Planning (PP/DS) for?

To optimize costs and times in production plans

To solve planning problems for defined objects

To automate material movements in material staging

To set default values in production master data

Q39. Your project uses process orders for the production of liquid chemicals. What can you define to ensure that production flow only happens in suitable and physically connected tanks? Note: There are 2 correct answers to this question.

Resource matrix

Resource network

Resource hierarchy

Resource selection

Q40. Which options do you have to plan both quantities and capacities during line loading in repetitive manufacturing?
Note: There are 2 Correct answers to this question?

Run MRP with quota arrangement

Run PP/DS heuristic for repetitive manufacturing

Assign planned orders manually in the planning table

Q41. How would you define pegging in the context of Advanced Planning?

An evaluation that is ordered according to the network structure of all related products and represents the coverage of issue elements with receipt elements

An evaluation that is ordered according to the bill-of-material structure of all related products and represents the relationship between the receipt and the issue elements

An evaluation to verify if there are material or capacity shortages in the ^ network after the production planning run

An evaluation to verify if there are overstock situations in the balance between receipt and issue elements after the production planning run

Q42. How can you limit the validity of a bill of material (BOM)? Note: There are 2 correct answers to this question,

By Plant

By Period

By Industry

By Material Status