[Q16-Q32] Free Sales Ending Soon – Use Real JN0-363 PDF Questions [Aug 04, 2025]

5/5 - (1 vote)

Free Sales Ending Soon – Use Real JN0-363 PDF Questions [Aug 04, 2025]

Updated Aug-2025 Exam JN0-363 Dumps – Pass Your Certification Exam

The Service Provider Routing and Switching, Specialist (JNCIS-SP) certification is ideal for individuals seeking job roles such as network administrators, senior network engineers, and network operations specialists. Candidates are expected to have a basic understanding of networking and routing concepts and are encouraged to possess practical knowledge and experience working with Juniper Networks.

Q16. Click the Exhibit.

Your network consists of subnets shown in the exhibit. You are asked to create an aggregate route for Router 1.
What is the appropriate prefix for the aggregate route in this scenario?

172.42.32.0/20

172.42.32.0/22

172.42.32.0/19

172.42.32.0/21

Q17. When would you use the qualified-next-hop statement with a static route?

You can use it to install the static route into different routing tables.

You can use it to send unwanted traffic to a null route.

You can use it to specify multiple next hops with different preferences.

You can use it to resolve the next hop if the next hop is not directly connected.

Q18. Referring to the exhibit, which statement is correct?

R1 will advertise only the 10.200.2.0/24 prefix to the 192.168.1.5 neighbor.

R1 will advertise only the 10.200.3.0/24 prefix to the 192.168.1.5 neighbor.

R1 will advertise the 10.200.1.0/24, 10.200.2.0/24, and 10.200.3.0/24 prefixes to the 192.168.1.5 neighbor.

R1 will advertise only the 10.200.1.0/24 prefix to the 192.168.1.5 neighbor.

Q19. Exhibit

You want the R1 and R3 routers to forward traffic destined to the 203.0.113.0/24 network through R2. Which BGP attribute would you modify to satisfy this requirement?

community

origin

MED

local preference

Q20. How does a Junos device learn about MAC addresses when II is first connected to an Ethernet LAN?

The device sends out a network broadcast message asking tor all devices and MAC addresses on the network and stores this information In addition lo the interface from which the response was received.

The device learns the destination MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.

The device learns the source MAC addresses from traffic in the network and stores this MAC address in addition to the interface from which the traffic was received.

The device sends out a network multicast message asking for all devices and MAC addresses on the network and stores this Information in addition to the interface from which the response was received.

Q21. Which two interface types are used as tunnel endpoints? (Choose two.)

Q22. Exhibit

You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.
What is the problem in this scenario?

This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.

The family iso statement must be added to the logical interface.

The router at the other end of the link Is not sending any IS-IS Hello messages.

The router at the other end of the link is a Level 1 only router.

Q23. Which two statements are correct about the way that BGP propagates routes by default? (Choose two.)

A route learned by EBGP will be re-advertised to IBGP peers.

A route learned by IBGP will not be re-advertised lo IBGP peers.

A route learned by EBGP will not be re-advertised to IBGP peers.

A route learned by IBGP will be re-advertised to IBGP peers.

Q24. By default, which two statements are correct about switch ports on a Junos device? (Choose two.)

Trunk ports receive and transmit untagged traffic.

Access ports receive and transmit tagged traffic.

Trunk ports receive and transmit tagged traffic.

Access ports receive and transmit untagged traffic.

Q25. The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?

R4 -> R1 -> R2 -> R5 -> R6

R4 -> R5 -> R6

R4 -> R5 -> R2 -> R3 -> R6

R4 -> R1 -> R2 -> R3 -> R6

Q26. Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?

Frames will be counted initially by filterB and then counted by filterA.

Frames will be counted initially by filterA and then counted by filterB.

Frames will be counted by filterA only.

Frames will be counted by filterB only.

Q27. In which situation would you disable penultimate-hop popping?

When you want to bypass a penultimate router that does not support IPv6 tunneling

When you want to ensure the penultimate router can perform the destination route lookup

When you want to enforce the same class-of-service behavior through the entire LSP

When you want to utilize a penultimate router that supports IPv6 tunneling

Q28. Which statement is true about an OSPF broadcast link?

All routers form an adjacency only with the BDR

All routers form an adjacency only with the DR

All routers form an adjacency with all other routers

All routers form an adjacency with both the DR and BDR

Q29. What are three label operations that an MPLS-enabled router performs? (Choose three.)

swap

push

pop

insert

rewrite

Q30. Which two functions are performed by the OSPF designated router? (Choose two.)

It advertises link-state information to the AS

It designates some routers as inactive when not needed

It forms adjacencies with all the other OSPF routers on the link

It chooses the backup designated router

Q31. You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses.
Which two tasks will accomplish your objective? (Choose two.)

Issue the sec protocols ospf area 0.0.0.0 interface ge-0/0/1.0 command.

Under the [edit routing-options] hierarchy, configure a 32-bit router ID.

issue the set protocols ospf3 area 0.0.0.0 interface ge-0/0/1.0 command.

Under the [edit routing-options] hierarchy, configure a 128-bit router ID.

Q32. An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?

The Junos OS will use the IP address assigned to the interface with the lowest MAC address.

A router ID will not be assigned until it is manually configured.

The Junos OS will use the IP address assigned to the loopback interface for the router ID.

The Junos OS will use the IP address assigned to the Interface with the highest priority.

JN0-363 Dumps To Pass JNCIS-SP Exam in One Day: https://www.testkingfree.com/Juniper/JN0-363-practice-exam-dumps.html

[Q16-Q32] Free Sales Ending Soon – Use Real JN0-363 PDF Questions [Aug 04, 2025]

Related Posts

2026 Updated Juniper JN0-351 Certification Study Guide Pass JN0-351 Fast [Q38-Q55]

[Aug-2026] Get 100% Real JN0-637 Free Online Practice Test [Q41-Q58]

Leave a Reply Cancel reply