Changing the Concept of 1Y0-241 Exam Preparation 2026 [Q86-Q100]

Rate this post

Changing the Concept of 1Y0-241 Exam Preparation 2026

Getting 1Y0-241 Certification Made Easy! Get professional help from our 1Y0-241 Dumps PDF

Citrix 1Y0-241 Exam Syllabus Topics:

Section	Objectives
SSL and Security	– SSL offloading and acceleration – Certificate management
Citrix ADC Architecture and Fundamentals	– ADC deployment models and form factors – Basic networking concepts for ADC – Licensing and feature sets
Troubleshooting and Maintenance	– Performance troubleshooting – Common deployment issues – Packet tracing and diagnostics
Advanced Traffic Management	– Advanced policies and optimization – Global Server Load Balancing (GSLB) – AppFlow and analytics
Traffic Management	– Content switching configuration – Load balancing methods and algorithms – Policies and expressions
System Configuration and Administration	– Initial setup and management access – High availability configuration – System monitoring and logging

QUESTION 86
Which statement is applicable when configuring the lights out management (LOM) port?

LOM port can be used to remotely monitor the appliance.

LOM is accessed using command line interface (CLI).

LOM IP address should be in the same subnet as NSIP.

LOM firmware is NOT included in the NetScaler upgrade package.

The LOM port is an out-of-band, IPMI-based interface that you configure on a separate network to remotely monitor and manage the appliance independently of the Citrix ADC software.

QUESTION 87
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?

CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)

CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)

CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)

CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)

https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/policies-and-expressions/adv-policy-exp-working-with-dates-times-and-numbers/exp-for-ssl-certificate-date.html
https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-actions-and-policies/config-built-in-sslactions.html

QUESTION 88
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)

DNS

Integrated caching

SSL

System

https://docs.citrix.com/en-us/citrix-adc/12-1/appexpert/policies-and-expressions/ns-pi-intro-pol-exp-wrapper-con/ns-pi-adv-class-pol-con.html

QUESTION 89
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?

SSL profile

SSL multiplexing

SSL bridge

SSL policy

Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-profiles.html

QUESTION 90
Scenario: A Citrix Administrator manages a Citrix SDX appliance with several instances configured. The administrator needs to enable Layer 2 mode on two instances.
When using a shared network interface, what must the administrator do to ensure that traffic flows correctly?

Ensure Layer 3 and Layer 2 modes are enabled.

Enable tagging on all interfaces.

Enable MAC-based forwarding (MBF) mode.

Disable Layer 2 mode on a Citrix ADC instance.

Explanation
https://docs.citrix.com/en-us/sdx/current-release/configuring-managing-netscaler-instance/configuring-l2-mode-o

QUESTION 91
A Citrix Administrator is creating a new SSL vServer and notices the ns_default_ssl_profile frontend SSL profile is automatically bound to the SSL vServer.
Which two actions can the administrator perform to change or remove the ns_default_ssl_profile_frontend SSL profile once it is enabled? (Choose two.)

Globally unbind the ns_default_ssl_profile_frontend SSL.

Unbind the default SSL profile and bind the newly created SSL profile.

Create a separate SSL profile.

Unbind the ns_default_ssl_profile_frontend SSL profile from the SSL vServer without binding a replacement SSL profile.

Globally disable the ns_default_ssl_profile_frontend SSL profile.

QUESTION 92
Which two options are only allowed when creating advanced policies? (Choose two.)

TCP

CLIENT

DNS

SQL

Explanation
https://developer-docs.citrix.com/projects/citrix-adc-advanced-policy-expression-reference/en/latest/ answer: C. CLIENT and D. DNS Short Explanation with reference:
When creating advanced policies, you can use the following expression prefixes: HTTP, SYS, CLIENT, SERVER, DNS, DATE, TIME, and URL1. TCP and IP are not valid prefixes for advanced policies2. SQL is not a supported feature for advanced policies3.
1: Summary examples of advanced policy expressions and policies – NetScaler 2: Configure advanced policy infrastructure | AppExpert – NetScaler 3: Shift your gears to Advanced policy infrastructure in Citrix ADC

QUESTION 93
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default loadbalancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

Least connection

Least bandwidth

Least response time

Least packets

QUESTION 94
Scenario: A Citrix Administrator configured an authentication, authorization, and auditing (AAA) policy to allow users access through the Citrix ADC. The administrator bound the policy to a specific vServer.
Which policy expression will allow all users access through the vServer?

true

false

ns_true

ns_false

QUESTION 95
Scenario: A Citrix Administrator has executed the following commands:
> set cs vServer vServer-CS-1 -caseSensitive ON
> add cs action CS_Act_1 -targetLBVserver MYVPN_http
> add cs policy CS_Pol_1 -rule “http.REQ.HOSTNAME.CONTAINS(“server.citrix.lab”)” -action CS_Act_l
> bind cs vServer CS_vserver1 -policyName CS_Pol_1 -priority 100
What will be the outcome of this configuration?

The users trying to access http://server.citrix.lab will NOT be connected to the vServer MYVPN_http.

The users trying to access http://Server.Citrix.Lab will be redirected to http://server.citrix.lab.

The users trying to access http://server.citrix.lab will be connected to the vServer MYVPN_http.

The users trying to access http://Server.Citrix.Lab will be connected to the vServer MYVPN_http.

With case sensitivity turned on, the rule only matches the exact lowercase hostname
“server.citrix.lab,” so requests to http://server.citrix.lab will match the policy and be sent to MYVPN_http.

QUESTION 96
Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?

The junior administrator made the changes and did NOT force a failover to save the configuration.

The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.

Both Citrix ADCs in the HA pair restarted overnight.

The Citrix ADC appliances have different firmware versions.

“You are connected to the secondary node…” when first login to the NSIP and after saving the configuration

QUESTION 97
Scenario: A Citrix Administrator installed the compression feature on the web servers. To offload the compression on the Citrix ADC, the administrator configured the Citrix ADC appliance to remove the ‘Accept Encoding’ header from all HTTP client requests. However, the administrator observes that data is NOT being compressed by the Citrix ADC, even though the ‘Accept Encoding’ header is being removed from all requests.
What could be the cause of this issue?

The rewrite policy is bound at an incorrect bind point

The servers are automatically compressing all responses

The compression policy needs to be reconfigured

Servercmp is disabled on the Citrix ADC

QUESTION 98
Scenario: A Citrix Administrator would like to grant access to a Junior Citrix Administrator on the Citrix ADC.
The administrator would like to grant full access to everything except the following:
Shell User configuration
Partition configuration
Which preexisting command policy would meet the needs of this scenario?

Sysadmin

Operator

Network

Superuser

A sysadmin is lower than a superuser is terms of access allowed on the appliance. A sysadmin user can perform all Citrix ADC operations with the following exceptions: no access to the Citrix ADC shell, cannot perform user configurations, cannot perform partition configurations, and some other configurations as stated in the sysadmin command policy https://docs.citrix.com/en-us/citrix-adc/current-release/system/authentication-and-authorization-for-system-user/user-usergroups-command-policies.html

QUESTION 99
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?

HTTP on port 99

HTTP-ECV on port 80

HTTP on port 80

HTTP_ECV on port 99

Explanation
destPort TCP or UDP port to which to send the probe. If the parameter is set to 0, the port number of the service to which the monitor is bound is considered the destination port. For a monitor of type USER, however, the destination port is the port number that is included in the HTTP request sent to the dispatcher.
Does not apply to monitors of type PING.

QUESTION 100
A Citrix Administrator wants to configure independent and isolated access on a single appliance to allow three different departments to manage and isolate their own applications.
What can the administrator configure to isolate department-level administration?

Admin partitions that use dedicated VLANs

A SNIP in each partition, and bind a VLAN for the department

Policy-based routes for each department in the nsroot partition

Dedicated routes in the admin partitions for each department

Loading …