NSE7_OTS-7.2 Free Certification Exam Easy to Download PDF Format 2026 [Q19-Q35]

Rate this post

NSE7_OTS-7.2 Free Certification Exam Easy to Download PDF Format 2026

Get 100% Success with Latest NSE 7 Network Security Architect NSE7_OTS-7.2 Exam Dumps

Fortinet NSE7_OTS-7.2 certification exam consists of 60 multiple-choice questions that must be completed within 120 minutes. NSE7_OTS-7.2 exam is computer-based and can be taken at any authorized Fortinet testing center. To pass the exam, candidates must achieve a score of 70% or higher. Upon passing the exam, candidates will receive the Fortinet NSE 7 – OT Security 7.2 certification, which is valid for two years.

QUESTION 19
Refer to the exhibit.

An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?

Set all application categories to apply default actions.

Change the security action of the industrial category to monitor.

Set the priority of the C.BO.NA.1 signature override to 1.

Remove IEC.60870.5.104 Information.Transfer from the first filter override.

According to the Fortinet NSE 7 – OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection.
Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of
1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.
NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.
Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect – Fortinet

QUESTION 20
Refer to the exhibit.

The IPS profile is added on all of the security policies on FortiGate.
For an OT network, which statement of the IPS profile is true?

FortiGate has no IPS industrial signature database enabled.

The listed IPS signatures are classified as SCADA equipment.

All IPS signatures are overridden and must block traffic match signature patterns.

The IPS profile inspects only traffic originating from SCADA equipment.

QUESTION 21
A FortiGate device is newly deployed as the edge gateway of an OT network security fabric. The downstream FortiGate devices are also newly deployed as Security Fabric leafs to protect the control area zone.
With no additional essential networking devices, and to implement micro-segmentation on this OT network, what configuration must the OT network architect apply to control intra-VLAN traffic?

Enable transparent mode on the edge FortiGate device.

Enable security profiles on all interfaces connected in the control area zone.

Set up VPN tunnels between downstream and edge FortiGate devices.

Create a software switch on each downstream FortiGate device.

QUESTION 22
Refer to the exhibit. Which statement is true about application control inspection?

The industrial application control inspection process is unique among application categories.

Security actions cannot be applied on the lowest level of the hierarchy.

You can control security actions only on the parent-level application signature

The parent signature takes precedence over the child application signature.

QUESTION 23
Refer to the exhibit.

You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?

You must use a FortiAuthenticator.

You must register the same FortiToken on more than one FortiGate.

You must use the user self-registration server.

You must use a third-party RADIUS OTP server.

QUESTION 24
Refer to the exhibit.

An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)

The FortiGate-Edge device must be in NAT mode.

NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.

The FortiGate devices is in offline IDS mode.

Port5 is not a member of the software switch.

QUESTION 25
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?

Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.

Configure a fuel server on the remote network and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.

Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.

Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.

QUESTION 26
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?

FortiGate

FortiEDR

FortiSwitch

FortiNAC

QUESTION 27
Refer to the exhibit. The IPS profile is added on all of the security policies on FortiGate. For an OT network, which statement of the IPS profile is true?

FortiGate has no IPS industrial signature database enabled.

The listed IPS signatures are classified as SCADAapphcat nns

All IPS signatures are overridden and must block traffic match signature patterns.

The IPS profile inspects only traffic originating from SCADA equipment.

QUESTION 28
Refer to the exhibit.
Given the configurations on the FortiGate, which statement is true?

FortiGate is configured with forward-domains to reduce unnecessary traffic.

FortiGate is configured with forward-domains to forward only domain controller traffic.

FortiGate is configured with forward-domains to forward only company domain website traffic.

FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.

QUESTION 29
An OT administrator deployed many devices to secure the OT network. However, the SOC team is reporting that there are too many alerts, and that many of the alerts are false positive. The OT administrator would like to find a solution that eliminates repetitive tasks, improves efficiency, saves time, and saves resources.
Which products should the administrator deploy to address these issues and automate most of the manual tasks done by the SOC team?

FortiSIEM and FortiManager

FortiSandbox and FortiSIEM

FortiSOAR and FortiSIEM

A syslog server and FortiSIEM

QUESTION 30
FortiAnalyzer is implemented in the OT network to receive logs from responsible FortiGate devices. The logs must be processed by FortiAnalyzer.
In this scenario, which statement is correct about the purpose of FortiAnalyzer receiving and processing multiple log messages from a given PLC or RTU?

To isolate PLCs or RTUs in the event of external attacks

To configure event handlers and take further action on FortiGate

To determine which type of messages from the PLC or RTU causes issues in the plant

To help OT administrators configure the network and prevent breaches

QUESTION 31
Refer to the exhibit.

You are assigned to implement a remote authentication server in the OT network.
Which part of the hierarchy should the authentication server be part of?

Edge

Cloud

Core

Access

QUESTION 32
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)? (Choose three.)

FortiNAC

FortiManager

FortiAnalyzer

FortiSIEM

FortiGate

QUESTION 33
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?

RADIUS

Link traps

End station traffic monitoring

MAC notification traps

QUESTION 34
Refer to the exhibit.

Which statement is true about application control inspection?

The industrial application control inspection process is unique among application categories.

Security actions cannot be applied on the lowest level of the hierarchy.

You can control security actions only on the parent-level application signature

The parent signature takes precedence over the child application signature.

QUESTION 35
Refer to the exhibit.

PLC-3 and CLIENT can send traffic to PLC-1 and PLC-2. FGT-2 has only one software switch (SSW-1) connecting both PLC-3 and CLIENT. PLC-3 and CLIENT can send traffic to each other at the Layer 2 level.
What must the OT admin do to prevent Layer 2-level communication between PLC-3 and CLIENT?

Set a unique forward domain for each interface of the software switch.

Create a VLAN for each device and replace the current FGT-2 software switch members.

Enable explicit intra-switch policy to require firewall policies on FGT-2.

Implement policy routes on FGT-2 to control traffic between devices.

The NSE7_OTS-7.2 exam is a hands-on, practical exam that requires candidates to demonstrate their skills and knowledge in a simulated OT environment. NSE7_OTS-7.2 exam consists of multiple-choice questions, lab exercises, and written scenarios. The lab exercises are designed to test the candidate’s ability to configure and manage OT security solutions using Fortinet products. The written scenarios are designed to test the candidate’s ability to analyze and resolve security issues in an OT environment.

Get Ready to Pass the NSE7_OTS-7.2 exam Right Now Using Our NSE 7 Network Security Architect Exam Package: https://www.testkingfree.com/Fortinet/NSE7_OTS-7.2-practice-exam-dumps.html