[Q33-Q54] The Best Valid NSE5_FNC_AD-7.6 Dumps for Helping Passing NSE5_FNC_AD-7.6 Exam!

4.7/5 - (3 votes)

The Best Valid NSE5_FNC_AD-7.6 Dumps for Helping Passing NSE5_FNC_AD-7.6 Exam!

UPDATED Fortinet NSE5_FNC_AD-7.6 Exam Questions & Answer

Fortinet NSE5_FNC_AD-7.6 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Access Management and Troubleshooting	15%	– Guest and contractor access management – Troubleshooting 1. Connectivity and policy issues 2. Log interpretation and problem resolution
Topic 2: Concepts and Initial Configuration	20%	– FortiNAC architecture and components 1. System components and functions 2. Deployment models – Initial setup and configuration 1. Isolation networks and quarantine concepts 2. Configuration wizard usage 3. Infrastructure device modeling and organization
Topic 3: Integration	20%	– FortiNAC-F Manager 1. Centralized management setup 2. Multi-instance management – Integration with network infrastructure 1. Syslog and trap input configuration 2. SNMP, RADIUS, and CLI communication – Third-party and service integration 1. Fortinet product integration 2. Mobile Device Management (MDM) integration
Topic 4: Network Visibility and Monitoring	20%	– Monitoring and logging 1. Event and system log analysis 2. Network behavior monitoring – Device discovery and profiling 1. Endpoint identification and classification 2. Profiling rule configuration
Topic 5: Deployment and Provisioning	25%	– Access control configuration 1. Security policy creation and enforcement 2. VLAN assignment and network segmentation – Security automation and response 1. Automated actions for security events 2. Remediation and enforcement workflows – High availability (HA) setup and monitoring

NO.33 Two FortiNAC-F devices have been configured as a 1+1 HA pair. The primary server went offline and a successful failover to the secondary has occurred.
What happens if the primary server comes back online?

The secondary server will update the primary and the servers will load balance until an administrator forces the primary to resume full control.

After five successful heartbeats between the servers, the primary server will resume control.

The primary server will determine that the secondary has control and power down for maintenance.

The primary and secondary servers will resume communication and the secondary will maintain control.

NO.34 During an evaluation of state-based enforcement, an administrator discovers that ports that should not be under enforcement have been added to enforcement groups.
In which view would the administrator be able to identify who added the ports to the groups?

The Admin Auditing view

The Event Management view

The Port Changes view

The Security Events view

NO.35 While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?

The wrong SNMP community string was entered during discovery.

The SNMP ObjectlD is not recognized by FortiNAC-F.

A read-only SNMP community siring was used.

SNMP is not enabled on the switch.

NO.36 A healthcare organization is integrating FortiNAC-F with its existing MDM. Communication is failing between the systems.
What could be a probable cause?

Security Fabric traffic is failing

SSH communication is failing

REST API communication is failing

SOAP API communication is failing

NO.37 A network administrator is troubleshooting a network access issue for a specific host. The administrator suspects the host is being assigned a different network access policy than expected.
Where would the administrator look to identify which network access policy, if any, is being applied to a particular host?

The Policy Logs view

The Connections view

The Policy Details view for the host

The Port Properties view of the hosts port

NO.38 An administrator wants to use FortiNAC-F to prevent internal engineers from accessing specific websites as defined in web filter categories on FortiGate.
In addition to a security trigger and associated action, which configuration must also be defined on FortiNAC-F?

A profiling method

A firewall policy

A compliance policy

A user/host profile

NO.39 Refer to the exhibit.

When a contractor account is created using this template, which value is set in the accounts Role field?

Accounting Contractor

Eng-Contractor

Engineer-Contractor

Contractor

NO.40 In which three ways would deploying a FortiNAC-F Manager into a large environment consisting of several FortiNAC-F CAs simplify management? (Choose three.)

Global infrastructure device inventory

Global version control

Global authentication security policies

Pooled licenses

Global visibility

NO.41 Which group type can have members added directly from the FortiNAC Control Manager?

Administrator

Device

Port

Host

NO.42 Where should you configure MAC notification traps on a supported switch?

Only on ports that generate linkup and linkdown traps

Only on ports defined as learned uplinks

On all ports on the switch

On all ports except uplink ports

NO.43 Which three communication methods are used by FortiNAC to gather information from and control, infrastructure devices? (Choose three.)

CLI

SMTP

SNMP

FTP

RADIUS

NO.44 Refer to the exhibit.

An administrator is configuring FortiNAC-F for the onboarding of guest users.
Which IP address would be used for the gateway defined in the DHCP scope?

10.0.1.254

10.20.1.250

10.10.1.250

10.0.1.110

NO.45 An administrator wants FortiNAC-F to return a group of user-defined RADIUS attributes in RADIUS responses.
Which condition must be true to achieve this?

The requesting device must support RFC 5176.

Inbound RADIUS requests must contain the Calling-Station-ID attribute.

The device models in the inventory view must be configured for proxy-based authentication.

RADIUS accounting must be enabled on the FortiNAC-F RADIUS server configuration.

NO.46 What must an administrator configure to allow FortiNAC-F to process incoming syslog messages that are not supported by default?

A Syslog Service Connector

A Security Action

A Security Event Parser

A Log Receiver

NO.47 An administrator wants each department to create and manage its own contractor accounts but not be able to manage contractor accounts for other departments.
What must the administrator configure to limit the sponsor’s capabilities?

The user/host profile applied to the contractor

The sponsor’s administrative profile

The contractor’s template

The portal settings on the kiosk portal page

NO.48 An administrator wants to build a security rule that will quarantine contractors who attempt to access specific websites.
In addition to a user host profile, which two components must the administrator configure to create the security rule? (Choose two.)

Methods

Action

Endpoint compliance policy

Trigger

Security String

NO.49 When creating a device profiling rule, what are two advantages of registering the device in the host view? (Choose two.)

The devices can be managed as a generic SNMP device.

The devices will have connection logs.

The devices can be associated with a user.

The devices can be polled for connection status.

In FortiNAC-F, the Device Profiler is a rule-based engine that evaluates unknown “rogue” devices and classifies them based on fingerprints and behavior. When a profiling rule matches a device, the administrator can configure the rule to automatically register that device. The registration process can place the device record in two primary locations: the Topology View (as a device) or the Host View (as a registered host).
According to the FortiNAC-F Administration Guide, registering a device in the Host View provides significant advantages for identity management and historical tracking. First, the devices can be associated with a user (C). In the FortiNAC database architecture, the Host View is the primary repository for endpoint identity; placing a profiled device here allows the system to link that hardware (MAC address) to a specific user account, whether that user is an employee, guest, or a system-level “owner”. This association is essential for Role-Based Access Control (RBAC) and for tracking accountability across the network fabric.
Second, devices registered in the Host View will have connection logs (B). FortiNAC-F maintains a detailed operational history for all host records, including every instance of the device connecting to or disconnecting from a port, its IP address assignments, and the specific policies applied during each session. These logs are invaluable for troubleshooting connectivity issues and for security forensic audits, as they provide a clear timeline of the device’s lifecycle on the network. In contrast, devices managed only in the Topology View are typically treated as infrastructure components where the focus is on device availability rather than individual session history.
“Devices that are registered and associated with a user are placed in the Host View and removed from the Profiled Devices window… Placing a device in the Host View allows for the tracking of connection history and the association of the device with a specific identity or user record within the FortiNAC database.”

NO.50 When configuring isolation networks in the configuration wizard, why does a layer 3 network type allow for more than one DHCP scope for each isolation network type?

The layer 3 network type allows for one scope for each possible host status.

Configuring more than one DHCP scope allows for DHCP server redundancy

There can be more than one isolation network of each type

Any scopes beyond the first scope are used if the initial scope runs out of IP addresses.

NO.51 Refer to the output below.

Examine the communication between a primary FortiNAC-F (192.168.10.10) and a secondary FortiNAC-F (192.168.10.110) configured as a 1+1 HA pair.
What is the current state of the FortiNAC-F HA pair?

The primary server is running and in control.

Failover from the primary server to the secondary server is in progress.

The secondary server is running and in control.

The database replication failed.

NO.52 An administrator wants to continually monitor endpoints for the existence of a specific registry key and the status of a required security service.
Which two requirements must be in place for the administrator to use FortiNAC-F compliance monitors? (Choose two.)

Remediation admin scan

MDM integration

Persistent agent

Custom scan

NO.53 Which two policy types can be created on a FortiNAC Control Manager? (Choose two.)

Authentication

Network Access

Endpoint Compliance

Supplicant EasvConnect

NO.54 Which two agents can validate endpoint compliance transparently to the end user? (Choose two.)

Dissolvable

Mobile