Provide Valid NSE4_FGT-7.2 Dumps To Help You Prepare For Fortinet NSE 4 – FortiOS 7.2 Exam Feb 05, 2024 [Q32-Q46]

4/5 - (1 vote)

Provide Valid NSE4_FGT-7.2 Dumps To Help You Prepare For Fortinet NSE 4 – FortiOS 7.2 Exam Feb 05, 2024

Fortinet NSE4_FGT-7.2 Dumps Questions [2024] Pass for NSE4_FGT-7.2 Exam

Fortinet NSE4_FGT-7.2 exam is a certification exam that focuses on the skills and knowledge required to configure and manage Fortinet security solutions. NSE4_FGT-7.2 exam is designed for IT professionals who want to validate their skills in managing and securing networks using Fortinet’s FortiOS 7.2 platform. NSE4_FGT-7.2 exam is also suitable for IT professionals who want to advance their careers in the field of network security.

NO.32 Which statement about video filtering on FortiGate is true?

Video filtering FortiGuard categories are based on web filter FortiGuard categories.

It does not require a separate FortiGuard license.

Full SSL inspection is not required.

Otis available only on a proxy-based firewall policy.

NO.33 FortiGate is configured as a policy-based next-generation firewall (NGFW) and is applying web filtering and application control directly on the security policy. Which two other security profiles can you apply to the security policy? (Choose two.)

Antivirus scanning

File filter

DNS filter

Intrusion prevention

NO.34 Which two statements are correct regarding FortiGate HA cluster virtual IP addresses? (Choose two.)

Heartbeat interfaces have virtual IP addresses that are manually assigned.

A change in the virtual IP address happens when a FortiGate device joins or leaves the cluster.

Virtual IP addresses are used to distinguish between cluster members.

The primary device in the cluster is always assigned IP address 169.254.0.1.

NO.35 Refer to the exhibits.
The exhibits show a network diagram and firewall configurations.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
Remote-User1 must be able to access the Webserver. Remote-User2 must not be able to access the Webserver.

In this scenario, which two changes can the administrator make to deny Webserver access for Remote-User2?
(Choose two.)

Disable match-vip in the Deny policy.

Set the Destination address as Deny_IP in the Allow-access policy.

Enable match vip in the Deny policy.

Set the Destination address as Web_server in the Deny policy.

Explanation
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Firewall-does-not-block-incoming-WAN-to-LAN/ta-

NO.36 Refer to the exhibit.

Examine the intrusion prevention system (IPS) diagnostic command.
Which statement is correct If option 5 was used with the IPS diagnostic command and the outcome was a decrease in the CPU usage?

The IPS engine was inspecting high volume of traffic.

The IPS engine was unable to prevent an intrusion attack .

The IPS engine was blocking all traffic.

The IPS engine will continue to run in a normal state.

NO.37 Refer to the exhibits.

An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?

Change the csf setting on ISFW (downstream) to set configuration-sync local.

Change the csf setting on ISFW (downstream) to set authorization-request-type certificate.

Change the csf setting on both devices to set downstream-access enable.

Change the csf setting on Local-FortiGate (root) to set fabric-object-unification default.

NO.38 An organization’s employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent the SSL VPN negotiation failure?

Change the session-ttl.

Change the login timeout.

Change the idle-timeout.

Change the udp idle timer.

NO.39 Which statements about the firmware upgrade process on an active-active HA cluster are true? (Choose two.)

The firmware image must be manually uploaded to each FortiGate.

Only secondary FortiGate devices are rebooted.

Uninterruptable upgrade is enabled by default.

Traffic load balancing is temporally disabled while upgrading the firmware.

NO.40 An administrator needs to increase network bandwidth and provide redundancy.
What interface type must the administrator select to bind multiple FortiGate interfaces?

VLAN interface

Software Switch interface

Aggregate interface

Redundant interface

NO.41 An administrator needs to increase network bandwidth and provide redundancy.
What interface type must the administrator select to bind multiple FortiGate interfaces?

VLAN interface

Software Switch interface

Aggregate interface

Redundant interface

An aggregate interface is a logical interface that combines two or more physical interfaces into one virtual interface1. An aggregate interface can increase network bandwidth and provide redundancy by distributing traffic across multiple physical interfaces using a load balancing algorithm1. An aggregate interface can also support link aggregation control protocol (LACP) to negotiate the link aggregation settings with the connected device1.
Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/567758/aggregation-and-redundancy

NO.42 Refer to the exhibit showing a debug flow output.

Which two statements about the debug flow output are correct? (Choose two.)

The debug flow is of ICMP traffic.

A firewall policy allowed the connection.

A new traffic session is created.

The default route is required to receive a reply.

NO.43 Which two statements are correct about SLA targets? (Choose two.)

You can configure only two SLA targets per one Performance SLA.

SLA targets are optional.

SLA targets are required for SD-WAN rules with a Best Quality strategy.

SLA targets are used only when referenced by an SD-WAN rule.

NO.44 Examine this FortiGate configuration:

How does the FortiGate handle web proxy traffic coming from the IP address 10.2.1.200 that requires authorization?

It always authorizes the traffic without requiring authentication.

It drops the traffic.

It authenticates the traffic using the authentication scheme SCHEME2.

It authenticates the traffic using the authentication scheme SCHEME1.

“What happens to traffic that requires authorization, but does not match any authentication rule? The active and passive SSO schemes to use for those cases is defined under config authentication setting”

NO.45 Which two statements are true when FortiGate is in transparent mode? (Choose two.)

By default, all interfaces are part of the same broadcast domain.

The existing network IP schema must be changed when installing a transparent mode.

Static routes are required to allow traffic to the next hop.

FortiGate forwards frames without changing the MAC address.

Reference:
attachID=Fortigate_Transparent_Mode_Technical_Guide_FortiOS_4_0_version1.2.pdf&documentID=FD33113

NO.46 An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192. 168. 1.0/24 and the remote quick mode selector is 192. 168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site B?

192. 168. 1.0/24

192. 168.0.0/24

192. 168.2.0/24

192. 168.3.0/24

For an IPsec VPN between site A and site B, the administrator has configured the local quick mode selector for site A as 192.168.1.0/24 and the remote quick mode selector as 192.168.2.0/24. This means that the VPN will allow traffic to and from the 192.168.1.0/24 subnet at site A to reach the 192.168.2.0/24 subnet at site B.
To complete the configuration, the administrator must configure the local quick mode selector for site B. To do this, the administrator must use the same subnet as the remote quick mode selector for site A, which is 192.168.2.0/24. This will allow traffic to and from the 192.168.2.0/24 subnet at site B to reach the 192.168.1.0/24 subnet at site A.
Therefore, the administrator must configure the local quick mode selector for site B as 192.168.2.0/24.

Loading …

Fortinet NSE4_FGT-7.2 certification exam is ideal for IT professionals who are responsible for managing network security solutions in their organization, including network administrators, security engineers, and system administrators. Fortinet NSE 4 – FortiOS 7.2 certification is also beneficial for professionals who want to enhance their career prospects and stay up-to-date with the latest network security trends and technologies.

Achieve Success in Actual NSE4_FGT-7.2 Exam NSE4_FGT-7.2 Exam Dumps: https://www.testkingfree.com/Fortinet/NSE4_FGT-7.2-practice-exam-dumps.html