Online Questions – Valid Practice To your H11-861_V4.0 Exam (Updated 62 Questions) [Q10-Q26]

Q10. In the SIP protocol, the Via header field indicates the route of the subsequent response message.

Q11. Which of the following NEs’ information cannot be collected using the diagnostic information collection function (Maintenance > Diagnostic Info Collection) on the SMC web interface?

Q12. By default, the SMC provides six user roles. Default permissions of each user role can be modified or deleted based on site requirements.

Q13. In a SIP multipoint conference, if BFCP Trans Type is set to TCP on the MCU, the BFCP communication protocol must be set to TCP on the endpoint.

Q14. Assume that a dual-channel audio file uses the PCM encoding, the sampling frequency is 8 kHz, and each quantized sample value corresponds to an 8-bit binary code. What is the encoding rate (kbit/s) of the audio file?

Q15. In the non-DMZ public-private network traversal scenario (small- and medium-sized network where the SMC and SC are co-deployed), you need to configure the LAN2 port of the SC as the default routing port.

Q16. FILL BLANK
In a SIP-only multipoint conference, when a participant sends the presentation, the system uses the ____________ protocol for presentation. (Enter the abbreviation.)

Q17. Which of the following conference parameters need to be obtained by engineers when locating conference faults on the SMC video conferencing system? (Choose all that apply.)

Q18. FILL in BLANK
In an SVC intelligent forwarding conference, if an SVC participant requires to view 1080p video, the bandwidth of the SVC participant must be at least ____________ Mbit/s. (Enter an Arabic numeral.)

Q19. Generally, the bandwidth actually occupied by a video conference is greater than the conference bandwidth. What are the possible causes? (Choose all that apply.)

Q20. By default, a single registration SC server supports a maximum of 20,000 registered devices.

Q21. Which of the following permissions are granted to an SMC system administrator? (Choose all that apply.)

Q22. After an AVC conference is held, a user logs in to the MCU and runs the debug command. The following information is displayed:

Which of the following is the IP address of site T3?

Q23. Which of the following statements is false about point-to-point calls?

Q24. Which of the following registration information types are carried in an RRQ to register with the GK? (Choose all that apply.)

Q25. Which of the following is the maximum number of cascaded conference levels supported by the SMC?

Q26. The SMC system O&M engineer John wants to start and stop the SC database (version V600R019C10SPCb20 or later). Which of the following user roles can be used to perform such operations on the database?